Loading design…
AlexEsqu
| Reference | Value | Description |
|---|---|---|
| U1 | CH340K | USB UART bridge |
| U4 | 74HC4052 | 2 Circuit IC Switch 4:1 150Ohm 16-DHVQFN (2.5x3.5) |
| U5 | B0505S-1W1 | convertisseur de tension DC-DC |
| U6 | 6N137 | Single High Speed LSTTL/TTL Compatible Optocoupler with enable, dV/dt 1000/us, VCM 10, max 7V VCC, DIP-8 |
| U7 | MAX485E | Half duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate, no low-power shutdown, with receiver/driver enable, 32 receiver drive capability, DIP-8 and SOIC-8 |
| U8 | ATMEGA2561-16AU | Microcontroller with a lot of pins |
| C10 | 10n | Capacitor |
| C11,C19,C22 | 4.7uF | Polarized capacitor, small US symbol |
| C15 | 10nF | Capacitor |
| C16-C18,C20,C21,C23,C24,C27-C31 | 100nF | Capacitor |
| C25,C26 | 12pF | Capacitor |
| D7 | RED | |
| D8 | GREEN | |
| D9,D10 | YELLOW | |
| GND026-GND028,GND030,GND031 | GND | |
| J1 | JST_Connector_To_Wrist_Board | |
| J2 | USB Connector to Computer | USB C Connector |
| J3 | JST_Connector_To_Other_Glove | |
| J4 | XLR5_Ground | XLR Connector, Male or Female, 5 Pins, Discrete Ground Pin |
| J5 | USB Connector to Powerbank | USB C Connector |
| R14,R18,R20,R23-R26 | 1k | Resistor |
| R15,R19 | 1M | Resistor |
| R16,R17 | 5.1k | Resistor |
| R21,R22 | 5.1K | Resistor |
| R27 | 330R | Resistor |
| R28 | 4.7k | Resistor |
| R29 | 10k | Resistor |
| R30 | 10kΩ | Resistor |
| Y2 | 16MHz | 16Mhz SMD |