drone
Anothyre
A simple drone
Components (32)
| Reference | Value | Description |
|---|---|---|
| Q201 | BUJ303B,127 | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| Q301,Q302,Q304,Q309,Q701-Q707 | BC846C | 0.1A Ic, 65V Vce, NPN Transistor, SOT-23 |
| Q303,Q305-Q307 | BC856C | 0.1A Ic, 65V Vce, PNP Transistor, SOT-23 |
| Q501 | 2N2222A | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| U201 | MCP1501-33xCH | 3.3V, 0.1%, 20mA, Precision Voltage Reference, SOT-23-6 |
| U202,U203,U301,U302,U305 | AS358 | Dual operational amplifier |
| U401 | ESP32-WROOM-32 | RF Module, ESP32-D0WDQ6 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| U402 | DPS368 | |
| U403 | BNO055 | Intelligent 9-axis absolute orientation sensor, LGA-28 |
| U701 | MCP2200-I-SO | USB 2.0 to UART Protocol Converter with GPIO, SOIC-20 |
| BZ501 | Buzzer | Buzzer, polarized |
| C201,C202,C305 | 22u | Polarized capacitor |
| C301-C304,C306-C310 | 100n | Unpolarized capacitor |
| C401 | 120nF | Unpolarized capacitor |
| C402 | 1uF | Unpolarized capacitor |
| D201 | 1N4148 | 100V 0.15A standard switching diode, DO-35 |
| D701-D705 | LED | Light emitting diode |
| D706 | RxLED | Light emitting diode |
| D707 | TxLED | Light emitting diode |
| J304 | XT60 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R201,R603,R606 | 2.7k | Resistor |
| R202 | 300k | Resistor |
| R203,R204 | 1.1k | Resistor |
| R205 | 16 | Resistor |
| R206 | 2k | Resistor |
| R207,R208,R301,R302,R601,R604 | 20k | Resistor |
| R401,R701 | 10k | Resistor |
| R501 | 1k | Resistor |
| R502 | 180 | Resistor |
| R602,R605 | 82k | Resistor |
| R702-R708 | 110k | Resistor |
| Y701 | CSTNE12M0GH5L000R0 | Three pin ceramic resonator |