| Q1 | NPN | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
|---|
| U1 | ESP32-S3 | Microcontroller, Wi-Fi 802.11b/g/n, Bluetooth, 32bit |
|---|
| U2 | NCP1529A | 1.7MHz, 1A, High Efficiency, Low Ripple, Adjustable Output Voltage Step-down Converter, SOT-23-5 |
|---|
| U3 | W25Q128JVS | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 |
|---|
| U4 | BQ24074RGT | USB-Friendly Li-Ion Battery Charger and Power-Path Management, VQFN-16 |
|---|
| U5 | DRV2605LDGS | Haptic driver for LRAs and ERMs with effect library, 2-5.2V, TSSOP-10 (Texas DGS0010A / VSSOP) |
|---|
| U6 | ESP-PSRAM64H | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 |
|---|
| Ant1 | PCB_Antenna:PCB_Antenna | |
|---|
| C1,C10,C15,C17,C18 | 0.1uF | Unpolarized capacitor |
|---|
| C2 | 10uF | Unpolarized capacitor |
|---|
| C3 | 10µF | Unpolarized capacitor |
|---|
| C4 | 100nF | Unpolarized capacitor |
|---|
| C5 | 22µF | Unpolarized capacitor |
|---|
| C6,C7 | 22pF | Unpolarized capacitor |
|---|
| C8,C9,C19,L2,L4 | TBD | Inductor,Unpolarized capacitor |
|---|
| C11-C13,C16 | 1uF | Unpolarized capacitor |
|---|
| C14 | 10nF | Unpolarized capacitor |
|---|
| D2,D3 | D_TVS | Bidirectional transient-voltage-suppression diode |
|---|
| J1,J6 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
|---|
| J2 | Conn_01x06_Pin | Generic connector, single row, 01x06, script generated |
|---|
| J3 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
|---|
| J4 | Conn_01x14_Pin | Generic connector, single row, 01x14, script generated |
|---|
| J5 | Conn_01x02_Socket | Generic connector, single row, 01x02, script generated |
|---|
| J7 | SD_Card_Receptacle | SD card receptacle |
|---|
| L1 | 2.2µH | Inductor |
|---|
| L3 | L | Inductor |
|---|
| R1 | 453 kΩ | Resistor |
|---|
| R2 | 100 kΩ | Resistor |
|---|
| R3 | 10k | Resistor |
|---|
| R4,R5 | 5.1k | Resistor |
|---|
| R6 | 2kΩ | Resistor |
|---|
| R7 | 1.8kΩ | Resistor |
|---|
| R8,R11 | 18kΩ | Resistor |
|---|
| R9,R10 | 10kΩ | Resistor |
|---|
| R12-R14 | 330Ω | Resistor |
|---|
| Status1 | LED_RGB | RGB LED, 6 pin package |
|---|
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
|---|
| Y1 | CDX-1293 | Two pin crystal |
|---|
