OpenJBOD-CM4
ApplePie420
Components (39)
| Reference | Value | Description |
|---|---|---|
| Q1 | NPN | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| U1 | Compute_Module_4 | |
| U2 | EMC2305-1-AP-TR | |
| U3 | EMC1833T-1E/RW | |
| U4 | RT9742AGJ5F | 3A, Discharge, Active High EN, TSOT-23-5 |
| U5,U6 | TPD4EUSB30 | 4-Channel ESD Protection for Super-Speed USB 3.0 Interface, USON-10 |
| U7 | MAX3221 | RS232 transceiver with 15kV ESD protection |
| U8 | 74LVC1G07 | Single Buffer Gate, Open Drain, Low-Voltage CMOS |
| U9,U10 | 74LVC1G02 | Single NOR Gate, Low-Voltage CMOS |
| C1-C3,C16 | 10u | Unpolarized capacitor |
| C4-C10,C17,C18,C21,C23 | 100n | Unpolarized capacitor |
| C11-C15 | 47u | Polarized capacitor |
| C19,C20,C22 | 470n | Unpolarized capacitor |
| D1-D3 | LED | Light emitting diode |
| D4,D5 | SS14 | Schottky diode, Generic Symbol, Alternate KiCAD Library |
| J1 | ATX-24 | ATX Power supply 24pins |
| J2 | Micro_SD_Card | Micro SD Card Socket |
| J3 | PCIe x1 Open Back | |
| J4 | RJ45_RB1-125B8G1A | LAN Transformer Jack, RJ45, 10/100/1000 BaseT |
| J5 | DE9_Plug_MountingHoles | 9-pin male plug pin D-SUB connector, Mounting Hole |
| J6 | FAN1 | |
| J7 | FAN2 | |
| J8 | FAN3 | |
| J9 | FAN4 | |
| J10 | FAN5 | |
| P1 | USB_C_Plug_USB2.0 | USB 2.0-only Type-C Plug connector |
| R1 | 2k2 1% | Resistor |
| R2-R9,R16,R17,R21 | 10k | Resistor |
| R10 | 12k 1% | Resistor |
| R11,R12 | 470 | Resistor |
| R13 | 5.1k | Resistor |
| R14 | 75 | Resistor |
| R15,R19 | 1k | Resistor |
| R18 | 2k2 | Resistor |
| R20 | 4k7 | Resistor |
| SW1 | ON | Push button switch, generic, two pins |
| TP1 | ALERT | test point |
| X6 | PROBE2 | Generic connector, single row, 01x02, script generated |
| X7 | PROBE1 | Generic connector, single row, 01x02, script generated |