sla-box
AvatarSD
Wether Climate Controller for SLA printing
Components (30)
| Reference | Value | Description |
|---|---|---|
| Q1,Q3,Q4 | BC547A | NPN TO-92 transistor, 45V, 100mA, 500mW, Complementary to BC557, Alternate KiCAD Library |
| Q2,Q5 | IRFR2905Z | TO-252 N-MOSFET enchancement mode transistor, 55V, 42A, 110W, Alternate KiCAD Library |
| U1 | LM7805CT | TO-220 5V 1A 3-terminal voltage regulator, Alternate KiCad Library |
| U2-U4 | DS18B20 | Programmable Resolution 1-Wire Digital Thermometer TO-92 |
| U5 | BME280 | 3-in-1 sensor, humidity, pressure, temperature, I2C and SPI interface, 1.71-3.6V, LGA-8 |
| A1 | Lolin_NodeMCU_ESP8266_V3 | Microcontroller module with ESP8266 MCU and WiFi |
| C1-C6 | 220n | 100nF Ceramic Capacitor |
| C7,C8 | 330n | 100nF Ceramic Capacitor |
| DZ1-DZ5 | BZV48-C3V3 | DO-27 Zener diode, 3.3V, 5W, Alternate KiCAD Library |
| F1 | Polyfuse_3A_15V | 3A trip, 1.5A hold Resettable fuse, polymeric positive temperature coefficient |
| J1,J3,J5,J16 | Conn_01x04 | HEADER 1x4 MALE PINS 0.100” 180deg |
| J2 | Conn_01x06 | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Screw_Terminal_01x08 | Generic screw terminal, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | PINHD_1x3_Female | Pin Header female with pin space 2.54mm. Pin Count -3 |
| J7,J14,J15 | PINHD_1x4_Female | Pin Header female with pin space 2.54mm. Pin Count -4 |
| J8,J9 | Screw_Terminal_2_P5.00mm | |
| J10 | Screw_Terminal_01x02 | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J11,J12 | Screw_Terminal_4_P5.00mm | |
| J13 | Power_DC_12V_In | Generic connector, single row, 01x02, script generated |
| J17 | Screw_Terminal_01x03 | Generic screw terminal, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J18 | PINHD_1x3_Male | Pin Header male with pin space 2.54mm. Pin Count -3 |
| J19 | Screw_Terminal_01x04 | Generic screw terminal, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| K1,K2 | SANYOU_SRD_Form_C | Sanyo SRD relay, Single Pole Miniature Power Relay, |
| R1-R8,R11,R12 | 6.8k | 1kΩ, 1/4W Resistor |
| R9 | 47.436k | 1kΩ, 1/4W Resistor |
| R10 | 1.5015k | 1kΩ, 1/4W Resistor |
| R13,R14 | 1k | 1kΩ, 1/4W Resistor |
| R15 | 510 | 1kΩ, 1/4W Resistor |
| R16 | 1.5k | 1kΩ, 1/4W Resistor |
| SW1 | SW_Nidec_CAS-120A1 | Switch, single pole double throw |