PowerLineSensorPCB
BecsterAS
Components (54)
| Reference | Value | Description |
|---|---|---|
| U1 | MLX90637 | |
| U2 | ZTPD2210 | |
| U3 | RP2350A | A microcontroller by Raspberry Pi, dual CPU architecture (ARM Cortex-M33 / RISC-V Hazard3), 150MHz, no flash, 520KB SRAM, 12 PIO state machines, VQFN-60 |
| U4 | RT6150BGQW | |
| U5 | TMAG5253BAx | |
| U6 | nRF9151-LAXX | LTE-M/NB-IoT/DECT-NR+ SiP, ARM Cortex-M33, GNSS, LGA-100 |
| U7 | LIS2HH12 | 3-Axis Accelerometer, 2/4/8g range, I2C/SPI interface |
| U8 | RAK3172-xx-8-SM-xI | LoRa Module, STM32WLE5, RU864/IN865/EU868, RAKwireless |
| U9 | P3T1755 | |
| U11 | LM2903 | Low-Power, Low-Offset Voltage, Dual Comparators, DIP-8/SOIC-8/SOP-8/TSSOP-8/VSSOP-8 |
| U12,U13 | W25Q128JVE | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, WSON-8 |
| U14 | SKY65943-11 | RF Front End GPS LNA Module |
| U15 | BQ25186 | BQ25186 1-Cell, 1A I2C Linear Battery Charger with Power Path, Ship Mode, Shutdown Mode, and Battery Tracking VINDPM |
| ANT1 | 206760-0001 | MOLEX - 206760-0001 - Antenna, Cellular / LTE, 2.7 GHz to 1.71 GHz, 4.4 dBi Gain, SMD, Linear |
| ANT2 | Antenna | Antenna |
| ANT3 | Antenna_Loop | Loop antenna |
| BT1 | Battery_Cell | Single-cell battery |
| C1,C2,C28 | 47u | Unpolarized capacitor |
| C3,C6,C24,C25,C29,C31,C32,C36,C40,C41,C44 | 4u7 | Unpolarized capacitor |
| C4,C5,C9-C23,C26,C27,C30,C34,C37-C39,C42 | 100n | Unpolarized capacitor |
| C7,C8 | 15p | Unpolarized capacitor |
| C33,C35 | C | Unpolarized capacitor |
| D1,D3 | D_Schottky | Schottky diode |
| D2,D14 | LED | Light emitting diode |
| D4-D13 | D_TVS | Bidirectional transient-voltage-suppression diode |
| FB1,R31,R32 | 22R | Ferrite bead,Resistor |
| FID1-FID3 | Fiducial | Fiducial Marker |
| J1 | SIM_Card_Shielded | SIM Card |
| J2 | Micro_SD_Card | Micro SD Card Socket |
| J3,J7,J10-J13 | Conn_Coaxial | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J5,J8 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J6 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J14 | Conn_01x06_Pin | Generic connector, single row, 01x06, script generated |
| J15-J17 | Conn_01x03_MountingPin | Generic connectable mounting pin connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 7.5nH | Inductor |
| L2 | 2.2u | Inductor |
| L4,L8 | 100nH | Inductor |
| L5,L7 | L | Inductor |
| L6 | 9.1nH | Inductor |
| L9 | 3u3 | Inductor |
| R1,R4,R43,R57,R58,R63-R80,R84-R98,R105-R124,R138 | 100k | Resistor |
| R2,R6,R8,R14,R16,R21-R25,R28,R35,R56,R61,R62,R102,R104,R131,R139 | 10k | Resistor |
| R3,R7 | 15k | Resistor |
| R5,R10,R15,R18,R33,R34,R44 | 1k | Resistor |
| R9 | 33R | Resistor |
| R11-R13,R36-R42,R45-R55,R60,R99-R101,R103 | 100R | Resistor |
| R17,R19,R20,R26,R27,R59,R81-R83,R125-R130,R132,R134,R137 | 0R | Resistor |
| R29,R30 | 5.1k | Resistor |
| R133 | 50R | Resistor |
| R135 | 487k | Resistor |
| R136 | 86.6k | Resistor |
| SW1-SW3 | SW_Push | Push button switch, generic, two pins |
| TH1,TH3 | Thermistor_NTC | Temperature dependent resistor, negative temperature coefficient |
| Y1 | Crystal_GND24 | Four pin crystal, GND on pins 2 and 4 |