ESP32-Dev-Kit-Clone
BrijModi
A 2-layer PCB design of the ESP32 Dev Kit V1 (30-pin), created using KiCad 9.0. Includes complete schematics, layout, and BOM.
Components (16)
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | 2N2222 | TRANS NPN 30V 0.8A TO-18 |
| U1 | ESP32-WROOM-32 | RF Module, ESP32-D0WDQ6 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| U2 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U3 | CP2102-GMR_NRND | IC USB-TO-UART BRIDGE 28VQFN |
| C1,C2 | 10uf | Unpolarized capacitor |
| C3,C5 | 0.1uf | Unpolarized capacitor |
| C4,C6 | 100nf | Unpolarized capacitor |
| D1 | D_Schottky | Schottky diode |
| D2 | LED | Light emitting diode |
| J1 | USB_B_Micro | USB Micro Type B connector |
| J2,J3 | Conn_01x15 | Generic connector, single row, 01x15, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1 | 330 | Resistor |
| R2,R5 | 10k | Resistor |
| R3 | 1M | Resistor |
| R4,R6 | 1k | Resistor |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |