Loading design…
Brobiwann
| Reference | Value | Description |
|---|---|---|
| U3 | ESP32-WROOM-32E | RF Module, ESP32-D0WD-V3 SoC, without PSRAM, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| U6 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U7 | PCA9685PW | 16-channel 12-bit PWM Fm+ I2C-bus LED controller RGBA TSSOP |
| U8 | CP2102N-Axx-xQFN28 | USB to UART master bridge, QFN-28 |
| +5V2,GND2,RXD2,TXD2 | TestPoint | test point |
| C1-C8,C12,C15-C17 | 22uF | C59461,Unpolarized capacitor |
| C13,C14,C19,C21,C22 | 0.1uF | Unpolarized capacitor |
| C18 | 10uF | Unpolarized capacitor |
| D1 | LED | Light emitting diode |
| D2 | SS54 | Schottky diode |
| D3,D8 | 1N5819WS | 40V 600mV@1A 1A SOD-323 Schottky Barrier Diodes, SOD-323 |
| D6 | P6SMB6.8CA | Bidirectional transient-voltage-suppression diode |
| D7 | SM712_SOT23 | 7V/12V, 600W Asymmetrical TVS Diode Array, SOT-23 |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J5 | Conn_01x04_Socket | Generic connector, single row, 01x04, script generated |
| R19,R25 | 10K | Resistor |
| R20,R21 | 4K7 | Resistor |
| R22,R30 | 2K | Resistor |
| R23,R24 | 5K1 | Resistor |
| R26,R27,R31-R36 | 220R | Resistor |
| R28 | 22K | Resistor |
| R29 | 47K | Resistor |
| SW3,SW4 | SW_Push | Push button switch, generic, two pins |