Loading design…
CabrilloRoboticsClub
The electronics for RoboSub 2025
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | FDMS86163P | MOSFET P-CH -100V 33A DFN5X6 |
| Q3 | SI7615ADN-T1-GE3 | MOSFET P-CH -100V 33A DFN5X6 |
| Q4-Q9 | ZXMN3A14F | |
| U1 | ZXTR2005ZQ-13 | IC REG LINEAR 5V 38MA SOT89-3 |
| U2 | PINA740AIREMR | |
| U3,U4 | PKJ7213WPI | PKJ 7200W series DC-DC Converters Input 14-160 V, Output up to 16.7 A / 200 W |
| U5 |
| U6 | Pico |
|---|
| Brd1 | SSD1306 | SSD1306 OLED |
|---|
| C1,C2 | 330uF | Polarized capacitor, US symbol |
|---|
| C3 | 0.1u 100V | Polarized capacitor, small US symbol |
|---|
| C4 | 10u 6.3v | Polarized capacitor, small US symbol |
|---|
| C5 | 0.1u | Polarized capacitor, small US symbol |
|---|
| C6-C8,C13,C14 | 680u | A750MW687M1VAAE018 |
|---|
| C9-C12,C15-C18 | 22uF | C2012X5R1V226M125AC |
|---|
| C19,C20 | 330 uF |
|---|
| C21-C26 | 2.2uF+/35V+ |
|---|
| C27 | C | Unpolarized capacitor |
|---|
| D1 | BZT52C10LP-7 | DIODE ZENER 10V 250MW 2DFN |
|---|
| D2,D17-D19,D26-D28 | LED_Red |
|---|
| D3-D5,D7,D30,D31 | LED | Light emitting diode |
|---|
| D6 | MBR120VLSFT1G | Schottky diode |
|---|
| D11-D13,D20,D22,D23 | LED_Green |
|---|
| D14-D16,D21,D24,D25 | SM4002 |
|---|
| F1-F6 | 0ZCG0300FF2B | Resettable fuse, polymeric positive temperature coefficient |
|---|
| F7-F12 | Fuse |
|---|
| J3,J5-J26 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
|---|
| J4 | Conn_01x07_Female |
|---|
| J27-J29,J36 | Conn_01x03_Pin | Generic connector, single row, 01x03, script generated |
|---|
| J30,J33 | BM03B-SRSS-TB | Generic connector, single row, 01x03, script generated |
|---|
| J31 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J32 | Conn_01x05_Socket | Generic connector, single row, 01x05, script generated |
|---|
| J34,J35 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Generic connector, single row, 01x03, script generated |
|---|
| J37-J42 | Conn_01x02 |
|---|
| J44 | Micro_SD_Card_Det2 | Micro SD Card Socket with two card detection pins |
|---|
| R1 | 8.8k | Resistor, small US symbol |
|---|
| R2,R20,R24,R46 | 1k | Resistor |
|---|
| R3,R21,R22 | 4.7k | Resistor |
|---|
| R4,R5,R11,R12,R18,R19 | DNP | Resistor |
|---|
| R6,R13,R28-R33,R37-R40,R42,R43 | 10k | Resistor |
|---|
| R7-R10,R14-R17 | 330m | Resistor, US symbol |
|---|
| R23 | 100 | Resistor |
|---|
| R34-R36,R41,R44,R45 | 2k |
|---|
| R47 | 10K | Resistor |
|---|
| R48 | 20K | Resistor |
|---|
| R50,R52 | 1K | Resistor |
|---|
| SW1 | SW_DPST_x2 | Single Pole Single Throw (SPST) switch, separate symbol |
|---|
| TP1-TP8 | TestPoint | test point |
|---|