RotoPD_Pro
CentyLab
Repo for RotoPD Pro hardware and documentation
Components (28)
| Reference | Value | Description |
|---|---|---|
| Q1 | RUM001L02T2CL | 20V 100mA 150mW, N Channel, SOT-723 |
| U1 | LM74502DDFR | 3.2V~65V Active High 1 High-side switch |
| U2 | LMR51635YDDCR | Buck 1.1MHz TSOT-23-6 4.3V-to-60V, 3.5A |
| U3,U6 | XRS40N10D | NMOS 100V 10mΩ@10V |
| U4 | INA238 | High-Side or Low-Side Measurement, Bi-Directional Current and Power Monitor (0-85V) with I2C, SMBus-, and PMBus-Compatible Interface, VSSOP-10 |
| U5 | AP33772S | USB PD Sink PD3.1 Controller 28V |
| U7 | TXS0102DCUR | 2-Bit Bidirectional Voltage-Level Shifter for Open-Drain and Push-Pull Application, SSOP-8 |
| C1,C6 | 4.7u | 4.7uF ±10% 100V Ceramic Capacitor X7S 1210,Unpolarized capacitor |
| C2-C4,C7,C8,C10-C12,C15 | 100n | 100nF 16V X7R ±10% 0402,Unpolarized capacitor |
| C5,C13 | 22u | Unpolarized capacitor |
| C9,C14 | 1u | |
| D1,D5 | RED | |
| D2 | D_TVS | Bidirectional transient-voltage-suppression diode |
| D4 | TPD4E05U06DQAR | TVS Diode for USBC |
| D6 | D_Schottky | Schottky diode |
| J1 | U263-163N-4GS1735 | USB 2.0 16P Type-C Receptacle |
| J2 | QWIIC | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | Screw_Terminal_5mm | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Conn_01x08 | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 3.3uH | 3.3uH Molded Inductor 6A 38mOhm, 5.4x5.2mm |
| R1,R2,R7,R13,R15 | 5.1k | |
| R3 | 18k | Resistor |
| R4 | 1k | Resistor |
| R5 | 20k | |
| R6,R8,R12 | 100k | Resistor |
| R9 | 5m | Resistor |
| R14 | 10k | Resistor |
| TH1 | Thermistor_NTC |