Loading design…
Cyberspecies
| Reference | Value | Description |
|---|---|---|
| U6 | LD1117S33TR_SOT223 | 800mA Fixed Low Drop Positive Voltage Regulator, Fixed Output 3.3V, SOT-223 |
| U7 | LD1117S50TR_SOT223 | 800mA Fixed Low Drop Positive Voltage Regulator, Fixed Output 5.0V, SOT-223 |
| U8 | USB2513B_Bi | USB 2.0 Hi-Speed Hub Controller |
| U9 | MCP7940N-xMNY | Real-Time Clock, I2C, Battery Backup, TDFN-8 |
| U11 | Sensored | |
| BootSW1 | SW_Push | Push button switch, generic, two pins |
| C1,C2 | 0.1uf | Unpolarized capacitor |
| C3,C4 | 10uf | Unpolarized capacitor |
| C5,C6,C13,C17 | 1uF | Unpolarized capacitor |
| C7,C8 | 22uF | Unpolarized capacitor |
| C9,C10,C14-C16,C18-C25 | 0.1uF | Unpolarized capacitor |
| C11,C12 | 18pf | Unpolarized capacitor |
| C26 |
| 10pf |
| Unpolarized capacitor |
| C27 | 12pf | Unpolarized capacitor |
|---|
| Coin_Cell1 | Coin Cell | Generic connector, single row, 01x02, script generated |
|---|
| C_Pins1 | C Pins | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| D1 | WS2812B-2020 | RGB LED with integrated controller, 2.0 x 2.0 mm, 12 mA |
|---|
| ESP1 | ESP32-S3-WROOM-1U | 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) module Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor Flash up to 16 MB, PSRAM up to 8 MB 36 GPIOs, rich set of peripherals Onboard PCB antenna |
|---|
| F_FFC1 | F FFC |
|---|
| G0_FFC1 | G0 FFC |
|---|
| G1_FFC1 | G1 FFC |
|---|
| J2 | MicroSD |
|---|
| M_FFC1 | M FFC |
|---|
| R1-R4 | 10K | Resistor |
|---|
| R5 | 1M | Resistor |
|---|
| R6 | 100K | Resistor |
|---|
| R7 | 12K | Resistor |
|---|
| S_FFC1 | S FFC |
|---|
| Y1 | TSX-3225 24MF18X-C0 | Four pin crystal, GND on pins 2 and 4 |
|---|
| Y2 | CM7V-T1A | Two pin crystal |
|---|