Loading design…
DeMarco
| Reference | Value | Description |
|---|---|---|
| U1,U2 | TL074 | Quad Low-Noise JFET-Input Operational Amplifiers, DIP-14/SOIC-14 |
| C1,C2 | 47uF | Polarized capacitor |
| C4,C5,C8,C9,C16,C17 | 100nF | Unpolarized capacitor |
| C7,C15 | 1uF | Unpolarized capacitor |
| C10-C14 | 1nF | Unpolarized capacitor |
| D1 | SB140+ | 40V 1A Schottky Barrier Rectifier Diode, DO-41 |
| D2 | SB140- | 40V 1A Schottky Barrier Rectifier Diode, DO-41 |
| D6-D14 | 1N4148 | 100V 0.15A standard switching diode, DO-35 |
| J0 | Conn_01x01 | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J1-J5 | TS_Jack_6.35mm_Sw | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling), 6.35mm, 1/4inch |
| J50,J60 | Conn_01x06 | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J100 | IDC_02x08 | IDC jack, 2x8 pins, row a carries same signals as row b. |
| J200 | IDC_02x05 | IDC jack, 2x5 pins, row a carries same signals as row b. |
| R1 | 47k | Resistor, US symbol |
| R2,R5,R9,R18,R22,RV1-RV5,RV7 | 100k | Potentiometer, US symbol,Resistor, US symbol |
| R3,R4,R24 | 68k | Resistor, US symbol |
| R6,R17 | 2k | Resistor, US symbol |
| R7 | 14k | Resistor, US symbol |
| R8 | 27k | Resistor, US symbol |
| R10-R16,R25 | 33k | Resistor, US symbol |
| R19,R20,R23 | 1k | Resistor, US symbol |
| R21 | 47K | Resistor, US symbol |
| R26 | 10k | Resistor, US symbol |
| RV6 | 50k | Trim-potentiometer, US symbol |
| SW1-SW3 | SW_SPDT | Switch, single pole double throw |
| SW4 | SW_SPDT_321_OnOff | Switch, single pole double throw |