Loading design…
DylanMeeks
| Reference | Value | Description |
|---|---|---|
| IC1 | TM4C123GH6PMIR | High performance 32-bit ARM® Cortex®-M4F based MCU |
| IC2 | LM2937ET-3.3_NOPB | 400mA and 500mA Voltage Regulator |
| IC3 | LM4041CILPR | |
| IC5 | TLV5616 | 12-Bit, 2.5 us DAC, Serial Input, Pgrmable Settling Time, Q temp available |
| U1 | Adafruit ST7735R | |
| U2 | ESP8266-1 | Wifi module |
| U3 |
| 111? | LM4890M/NOPB |
|---|
| C1 | 2.2uF X7R | Unpolarized capacitor |
|---|
| C2,C3,C8,C12,C14-C95,C98,C104 | 0.1uF X7R | Unpolarized capacitor |
|---|
| C4,C5 | 10pF C0G | Unpolarized capacitor |
|---|
| C6 | 0.1uF | Unpolarized capacitor |
|---|
| C7,C100,C102 | 1uF X7R | Unpolarized capacitor |
|---|
| C9-C11 | 0.01uF X7R | Unpolarized capacitor |
|---|
| C13,C101,C103 | 4.7uF X7R | Unpolarized capacitor |
|---|
| C97 | 10uF X7R | Unpolarized capacitor |
|---|
| C99 | 0.39uF X7R | Unpolarized capacitor |
|---|
| D1,D6-D83,D87 | SK6805 | RGB LED with integrated controller |
|---|
| D2,D3,D86 | LED | Light emitting diode |
|---|
| J1,J5 | XF3M1-2015-1B |
|---|
| J2 | JTAG | Header, 4-pin |
|---|
| J3 | LED_IN | Generic connector, single row, 01x01, script generated |
|---|
| J4 | LED_Row1 | Generic connector, single row, 01x01, script generated |
|---|
| J6 | LED_Row2 | Generic connector, single row, 01x01, script generated |
|---|
| J7 | LED_Row3 | Generic connector, single row, 01x01, script generated |
|---|
| J8 | LED_Row4 | Generic connector, single row, 01x01, script generated |
|---|
| J9 | LED_Row5 | Generic connector, single row, 01x01, script generated |
|---|
| J10 | LED_Row6 | Generic connector, single row, 01x01, script generated |
|---|
| J11 | LED_Row7 | Generic connector, single row, 01x01, script generated |
|---|
| J12 | LED_END | Generic connector, single row, 01x01, script generated |
|---|
| J13 | LA_UART | Header, 4-pin |
|---|
| J14 | LA_DAC | Header, 3-pin |
|---|
| J15 | PWR | Header, 3-pin |
|---|
| J16 | USB2 | Header, 2-pole |
|---|
| J19 | Port_F | Header, 4-pin |
|---|
| J326 | Test_Point | Generic connector, single row, 01x20, script generated |
|---|
| LS101 | Speaker | Speaker |
|---|
| R1,R3,R8,R9,R14,R16 | 10k | Resistor |
|---|
| R2 | 1M | Resistor |
|---|
| R4,R5,R7,R12,R17 | 500 | Resistor |
|---|
| R6,R11,R20,R22 | 0 | Resistor |
|---|
| R13 | 47k | Resistor |
|---|
| R15 | 2k | Resistor |
|---|
| R18,R19 | 20k | Resistor |
|---|
| SW1 | SW_Push | Push button switch, generic, two pins |
|---|
| TP1 | AMP_OUT | Testpoint |
|---|
| TP2 | 5V_TP | Testpoint |
|---|
| TP3 | 3V3_WIFI_TP | Testpoint |
|---|
| TP4 | DAC_OUT | Testpoint |
|---|
| TP5 | V_REF_TP | Testpoint |
|---|
| TP6 | GND_TP | Testpoint |
|---|
| Y1 | ABM3-16.000MHZ-B2-T | 16 MHz +/-20ppm Crystal 18pF 40 Ohms 2-SMD, No Lead |
|---|