Loading design…
EPFLRocketTeam
Repository containing PCBs files of FH2 Avionics
| Reference | Value | Description |
|---|---|---|
| IC1 | MIC94060YMT-TR | Power Switch ICs - Power Distribution Loadswitch w/level-shift |
| Q2 | IRLML2502 | 1.2A Id, 60V Vds, 480mOhm Rds, N-Channel HEXFET Power MOSFET, SOT-23 |
| U1 | RGBLED_1 | 859-LTST-E133CEGBK |
| U2 | TPS2116DRL | 2 Channnels Power Mux with Manual and Priority Switchover, 1.6-5.5V Input Voltage, 2.5A Output Current, Ron 40 mOhm, SOT-583-8 |
| U3 | MCP1727-3302xSN | 1.5A, Low Voltage, Low Quiescent Current LDO Regulator, 2.3 - 6V Input, Fixed 3.3V Output, 330mV Dropout, SOIC-8 |
| U4 | STM32L476RGTx | STMicroelectronics Arm Cortex-M4 MCU, 1024KB flash, 128KB RAM, 80 MHz, 1.71-3.6V, 51 GPIO, LQFP64 |
| U5 |
| INA228 |
| High-Side or Low-Side Measurement, Bi-Directional Current and Power Monitor (0-85V) with I2C, SMBus-, and PMBus-Compatible Interface, VSSOP-10 |
| U6 | MAX3226 | Single RS232 driver/receiver, 3.0V to 5V supply, 250kb/s, AutoShutdown Plus, SSOP-16 package |
|---|
| U8 | USBLC6-2P6 | Very low capacitance ESD protection diode, 2 data-line, SOT-666 |
|---|
| U9 | TMP1075DSG | I2C-bus digital temperature sensor and thermal watchdog, WSON-8 |
|---|
| BZ1 | Buzzer | CMI-9605IC-0580T |
|---|
| C1,C13,C14,C16-C23,C25,C26 | 0u1 | Unpolarized capacitor |
|---|
| C2 | 120p | Unpolarized capacitor |
|---|
| C3 | 1u | Unpolarized capacitor |
|---|
| C4 | 4u7 | Unpolarized capacitor |
|---|
| C5,C15 | 10u | Unpolarized capacitor |
|---|
| C6-C10,C12,C24 | 100n | Unpolarized capacitor |
|---|
| C11 | 1000p | Unpolarized capacitor |
|---|
| C29 | 680u | Unpolarized capacitor |
|---|
| D1 | 1N5819HW-7-F | 40V 600mV@1A 1A SOD-323 Schottky Barrier Diodes, SOD-323 |
|---|
| D2-D9 | LED | Light emitting diode |
|---|
| D11,D12 | PESD4USB3UTBS | Default 3V3 high-speed TVS, 4 channels |
|---|
| D14,D16,D18 | TPD1E05U06DYAR | Unidirectional ESD protection diode, 3.3V, SOD-882 |
|---|
| J1 | microSD_holder | Memory Card Connectors SD R/A PUSH-PUSH SMD CONN MICRO |
|---|
| J2 | USB_C_Receptacle | USB Full-Featured Type-C Receptacle connector |
|---|
| J3 | SPINE_in |
|---|
| J4 | Conn_01x08_Pin | Generic connector, single row, 01x08, script generated |
|---|
| R1 | 33 | Resistor |
|---|
| R2 | 33k | Resistor |
|---|
| R3,R4,R21,R22 | 4k7 | Resistor |
|---|
| R5,R14,R23 | 10k | Resistor |
|---|
| R6 | 100 | Resistor |
|---|
| R7,R9 | 100k | Resistor |
|---|
| R8,R10-R13,R15-R17 | 1k1 | Resistor |
|---|
| R18,R19 | 5k1 | Resistor |
|---|
| R20 | 160m | Resistor |
|---|
| SW1 | SW_Omron_B3U | Omron B3FS 6x6mm single pole normally-open tactile switch |
|---|
| SW3,SW4 | SW_SPDT | Switch, single pole double throw |
|---|
| TP1 | VDD_SD | test point |
|---|
| TP2 | 5V_SPINE | test point |
|---|
| TP3 | 5V | test point |
|---|
| TP4 | 3V3 | test point |
|---|
| TP5 | RX_in | test point |
|---|
| TP6 | TX_out | test point |
|---|
| TP7 | TX_in | test point |
|---|
| TP8 | RX_out | test point |
|---|