Loading design…
Electrium-Mobility
| Reference | Value | Description |
|---|---|---|
| U1 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U2 | USB_C_connector | |
| U3 | SGM2212-3.3 | Input Voltage Range: 2.7V to 20V. Output Current: 800mA |
| U4 | VL53L1CXV0FY1 | 4m distance ranging ToF sensor, Optical LGA12 |
| C1,C6-C8,C10,C12,C17 | 0.1uF | Unpolarized capacitor |
| C2,C3,C5,C9,C11,C18 | 10uF | Unpolarized capacitor |
| C4 | 1uF | Unpolarized capacitor |
| D1 | LED_red | Light emitting diode |
| D6 | D_Schottky | Schottky diode |
| J1 | Micro_SD_Card_Det_Hirose_DM3AT | Micro SD Card Socket with card detection pins |
| J2 | Conn_01x10_Pin | Generic connector, single row, 01x10, script generated |
| J3 | Conn_01x06_Pin | Generic connector, single row, 01x06, script generated |
| J4,J5 | 4P4C_Shielded | RJ connector, 4P4C (4 positions 4 connected), RJ9/RJ10/RJ22, Shielded |
| J6 | Screw_Terminal_01x03_ebrake | Generic screw terminal, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J7 | Screw_Terminal_01x03_throttle | Generic screw terminal, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J8 | Screw_Terminal_01x06 | Generic screw terminal, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J9 | Conn_01x14_Socket | Generic connector, single row, 01x14, script generated |
|---|
| J10 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
|---|
| R1-R3,R5 | 5.1K | Resistor |
|---|
| R4,R7,R10,R13,R15,R16 | 10K | Resistor |
|---|
| R8,R9 | 1.2K | Resistor |
|---|
| R14 | 30K | Resistor |
|---|
| sw1,sw2 | SW_Push_Dual | Push button switch, generic, symbol, four pins |
|---|
| TP1-TP4,TP8-TP10 | TestPoint | test point |
|---|