| U1 | STM32L031K6Tx | STMicroelectronics Arm Cortex-M0+ MCU, 32KB flash, 8KB RAM, 32 MHz, 1.65-3.6V, 25 GPIO, LQFP32 |
|---|
| U2 | TC1262-33 | 500mA Low Dropout CMOS Voltage Regulator, Fixed Output 3.3V, TO-220/SOT-223/TO-263 |
|---|
| C1,C3,C4 | 100nF | Unpolarized capacitor |
|---|
| C2 | 1u | Unpolarized capacitor |
|---|
| D1-D3 | LED | Light emitting diode |
|---|
| J1 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
|---|
| J2 | STLink | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3 | Serial | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J4 | I2C | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| R1 | 1k | Resistor |
|---|
| R2-R4 | 100 | Resistor |
|---|
| SW1 | SW_Push | Push button switch, generic, two pins |
|---|
