Loading design…
Febriyandi12
Kolaborasi untuk update desain pcb yang telah di research
| Reference | Value | Description |
|---|---|---|
| Q1-Q4 | 2N5551-TA | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| Q5 | BC547 | 0.1A Ic, 45V Vce, Small Signal NPN Transistor, TO-92 |
| U1 | ESP32-WROOM-32UE | RF Module, ESP32-D0WD-V3 SoC, without PSRAM, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, external antenna, SMD |
| U2,U4,U10-U13 | PC817 | DC Optocoupler, Vce 35V, CTR 50-300%, DIP-4 |
| U3 | RA-02_LORA | |
| U5 | LM1117DT-3.3 | 800mA Low-Dropout Linear Regulator, 3.3V fixed output, TO-252 |
| U6 |
|---|
| LM2576S-5 |
| 5V, 3A SIMPLE SWITCHER® Step-Down Voltage Regulator, TO-263 |
| U7 | DS3231M | Extremely Accurate I2C-Integrated RTC/TCXO/Crystal SOIC-16 |
|---|
| U9 | FM24C64B | 64Kb serial FRAM nonvolatile Memory, SOIC-8 |
|---|
| BT1 | CR1220MFR_FH | Coin Cell Battery 3V2-PINHORZ40mAh |
|---|
| BZ1 | Buzzer | Buzzer, polarized |
|---|
| C1 | 22uF | Unpolarized capacitor |
|---|
| C2 | 0.1uF | Unpolarized capacitor |
|---|
| C3,C12 | 100nF | Unpolarized capacitor |
|---|
| C4-C6 | 10uF | Polarized capacitor, small US symbol,Unpolarized capacitor |
|---|
| C7 | 100uF | Unpolarized capacitor |
|---|
| C8 | 1000uF | Unpolarized capacitor |
|---|
| C9,C10 | C_Polarized_US | Polarized capacitor, US symbol |
|---|
| D1,D2,D4,D5 | LED | Light emitting diode |
|---|
| D3 | 1N5822 | Schottky diode, filled shape |
|---|
| D6,D7 | MB6S | Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers, 700V Vrms, 1.0A If, DFS SMD package |
|---|
| D8,D9 | D_Schottky_Small_Filled | Schottky diode, small symbol, filled shape |
|---|
| D10 | TRIP 1 | Light emitting diode |
|---|
| D11 | TRIP 2 | Light emitting diode |
|---|
| D12 | MERAH | Light emitting diode |
|---|
| D13 | BIRU | Light emitting diode |
|---|
| J1 | UART | Generic connector, single row, 01x04, script generated |
|---|
| J2 | MOTOR IN | Generic connector, single row, 01x03, script generated |
|---|
| J3 | MSD-4-A | Memory Card Connectors 9 Positions, Push In, Auto Eject Out, SMT, 1.8 mm Height Above Board, |
|---|
| J4 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
|---|
| J6 | SHT31 | Generic connector, single row, 01x06, script generated |
|---|
| J7 | ADS1015 | Generic connector, single row, 01x10, script generated |
|---|
| J8 | PREASURE SENSOR | Generic connector, single row, 01x03, script generated |
|---|
| J9 | CO SENSOR | Generic connector, single row, 01x03, script generated |
|---|
| J12 | Boot | Generic connector, single row, 01x02, script generated |
|---|
| J13 | IN 12V | Generic connector, single row, 01x02, script generated |
|---|
| J15 | MOTOR1 | Generic connector, single row, 01x02, script generated |
|---|
| J16 | MOTOR2 | Generic connector, single row, 01x02, script generated |
|---|
| J17 | AUTO DRAIN | Generic connector, single row, 01x02, script generated |
|---|
| J18 | Buzzer AC | Generic connector, single row, 01x02, script generated |
|---|
| J19 | JUMPER | Generic connector, single row, 01x03, script generated |
|---|
| K1-K4 | SANYOU_SRD_Form_C | Sanyo SRD relay, Single Pole Miniature Power Relay, |
|---|
| L1 | 100uh | Inductor |
|---|
| R1,R2,R11,R17,R18,R28 | 1K | Resistor, US symbol |
|---|
| R3-R6,R13,R14,R26,R27 | 10K | Resistor, US symbol |
|---|
| R7,R8 | 4K7 | Resistor, US symbol |
|---|
| R9,R10 | 1k8 | Resistor, US symbol |
|---|
| R12,R15,R16,R29 | 510 | Resistor, US symbol |
|---|
| R19 | 1k | Resistor, US symbol |
|---|
| R20,R21 | 150K | Resistor |
|---|
| R22-R25 | 10k | Resistor |
|---|