Loading design…
Fiberprinter
| Reference | Value | Description |
|---|---|---|
| U1 | SQJ409EP-T1_GE3 | |
| U2 | SZ1SMB5927BT3G | |
| U3 | TPS56837HRPAR | |
| U4 | TPS565208 | 5A Synchronous Step-Down Voltage Regulator, Adjustable Output Voltage, 4.5-17V Input Voltage, SOT-23-6 |
| U5 | FT232RL | USB to Serial Interface, SSOP-28 |
| U6 | PTS647SM38SMTR2LFS | |
| U7 | TPM16050-S6TR |
| U8,U9 | RJK0456DPB-00-J5 |
|---|
| U10 | ATmega328PB-A | 20MHz, 32kB Flash, 2kB SRAM, 1kB EEPROM, TQFP-32 |
|---|
| U12 | MPU-6050 | InvenSense 6-Axis Motion Sensor, Gyroscope, Accelerometer, I2C |
|---|
| A1 | Pololu_Breakout_DRV8825 | Pololu Breakout Board, Stepper Driver DRV8825 |
|---|
| C1,C6,C7,C10,C13,C16,C17,C20,C23,C26,C27,C29,C35,C37,C38 | 100nF | Unpolarized capacitor |
|---|
| C2,C9 | 22nF | Unpolarized capacitor |
|---|
| C3-C5,C11,C12,C15,C24,C34,C36 | 10µF | Unpolarized capacitor |
|---|
| C8 | 47µF | Unpolarized capacitor |
|---|
| C14 | 22µF | Unpolarized capacitor |
|---|
| C18 | 1uF | Unpolarized capacitor |
|---|
| C19,C25,C28 | 4.7uF | Polarized capacitor |
|---|
| C21,C22 | 18pF | Unpolarized capacitor |
|---|
| C30-C33 | 0.1µF | Unpolarized capacitor |
|---|
| D1,D2 | WE-TVSP_DO-214AA_600W_BI |
|---|
| D3-D6 | YELLOW | Light emitting diode |
|---|
| D7 | GREEN | Light emitting diode |
|---|
| H1-H12 | MountHole | Mounting Hole with connection |
|---|
| J1 | PJ-082BH |
|---|
| J2,J3 | Fan_12/5V_Regelung |
|---|
| J4 | FAN0 |
|---|
| J5 | FAN1 |
|---|
| J6 | FAN2 |
|---|
| J7 | Stepper Motor | Generic connector, single row, 01x04, script generated |
|---|
| J8 | Servo Motor SM | Generic connector, single row, 01x03, script generated |
|---|
| J9 | Microstepping |
|---|
| J10 | Servo Motor BL Touch | Generic connector, single row, 01x03, script generated |
|---|
| J11,J22 | T3 |
|---|
| J12 | Steckverbinder_Male_Fans |
|---|
| J13 | Steckverbinder_Female_Leistung |
|---|
| J14 | FAN3 |
|---|
| J15 | Steckverbinder_Female_Motoren |
|---|
| J16 | ISP | Generic connector, double row, 02x03, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J18 | Quartz | Generic connector, single row, 01x02, script generated |
|---|
| J19-J21 | T2 |
|---|
| J23 | Conn_01x04_Socket | Generic connector, single row, 01x04, script generated |
|---|
| J24 | Steckverbinder_Male_Leistung |
|---|
| L1 | 4.7µH | Inductor |
|---|
| L2 | 3.3µH | Inductor |
|---|
| P1 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
|---|
| R1,R2 | 100k | Resistor |
|---|
| R3 | 30k | Resistor |
|---|
| R4 | 1k58 | Resistor |
|---|
| R5 | 30.1k | Resistor |
|---|
| R6 | 10 | Resistor |
|---|
| R7 | 54.9k | Resistor |
|---|
| R8,R11,R17 | 10k | Resistor |
|---|
| R9,R10 | 5k1 | Resistor |
|---|
| R12-R15 | 330 | Resistor |
|---|
| R16 | 1k | Resistor |
|---|
| R22-R25 | 4k7 | Resistor |
|---|
| TP2 | GND_Test | test point (alternative probe-style design) |
|---|
| TP3 | 12V_Test | test point (alternative probe-style design) |
|---|
| TP6 | 5V_USBC_Test | test point (alternative probe-style design) |
|---|
| TP7 | 5V_POW_Test | test point (alternative probe-style design) |
|---|
| TP8 | Quartz_1 | test point |
|---|
| TP9 | Quartz_2 | test point |
|---|
| TP18 | ADC2 | test point |
|---|
| TP19 | ADC3 | test point |
|---|
| TP20 | ADC1 | test point |
|---|
| TP21 | ADC0 | test point |
|---|
| TP22,TP23 | I_Sense_5V | 2-polar test point |
|---|
| TP25 | I_Sense_12V | 2-polar test point |
|---|
| Y1 | ECS-160-18-4X-CKM |
|---|