Loading design…
FloppyO1
| Reference | Value | Description |
|---|---|---|
| Q1 | PNM3FD20V1E | N-MOSFET transistor, drain/source/gate |
| U1 | GM7333 | 250mA LDO 40Vin 3.3Vout |
| U2-U4 | DRV8837 | H-Bridge driver, 1.8A, Low Voltage, PWM input, WSON-8 |
| U5 | LSM6DS3 | I2C/SPI, iNEMO inertial module: always-on 3D accelerometer and 3D gyroscope |
| U6 | STM32F072CBTx | STMicroelectronics Arm Cortex-M0 MCU, 128KB flash, 16KB RAM, 48 MHz, 2.0-3.6V, 37 GPIO, LQFP48 |
| U8 | AT24C02C | I2C Serial EEPROM, 2Kb (256x8) with Unique Serial Number, SOT-23-5 |
| C1-C8,C13 | 4.7u | Unpolarized capacitor |
| C9-C11,C14-C19 | 100n | Unpolarized capacitor |
| D1 |
|---|
| 1N5819WS |
| Schottky diode |
| D2 | STATUS | Light emitting diode |
|---|
| J3 | USB-C_304A-ACP16X |
|---|
| R1,R2,R6-R10 | 5.1k | Resistor |
|---|
| R3,R5 | 10k | Resistor |
|---|
| R4 | 1.5k | Resistor |
|---|
| R11 | 220 | Resistor |
|---|
| SW1 | BOOT | Push button switch, generic, two pins |
|---|