EE_Design
Gabriel8503
Circuit Designs for Personal Projects
Components (24)
| Reference | Value | Description |
|---|---|---|
| U1 | ATmega32U4-A | 16MHz, 32kB Flash, 2.5kB SRAM, 1kB EEPROM, USB 2.0, TQFP-44 |
| BT1 | Battery_Cell | Single-cell battery |
| C1,C2 | 12u | Unpolarized capacitor |
| C3 | 1p | Unpolarized capacitor |
| C4,C8 | 1u | Unpolarized capacitor |
| C5,C7 | 10n | Unpolarized capacitor |
| C6 | 47p | Unpolarized capacitor |
| D1,D2 | D_Schottky | Schottky diode |
| D4 | G_ON | Light emitting diode |
| D5 | LED_BKGR | RGB LED, blue/cathode/green/red |
| DS1 | OLED-128O064D | OLED display 128x64 |
| FB1 | 120 @100MHz | Ferrite bead |
| J1 | USB_B | USB Type B connector |
| L1 | 10u | Inductor |
| R1,R2 | 22 | Resistor |
| R3 | 1M | Resistor |
| R4,R5 | 10k | Resistor |
| R6 | 30.6k | Resistor |
| R7-R9,R12 | 220 | Resistor |
| R10,R11 | 4.7k | Resistor |
| RV1-RV3 | R_Potentiometer | Potentiometer |
| SW1 | SW_Push | Push button switch, generic, two pins |
| SW2 | SW_Wuerth_450301014042 | Switch slide, single pole double throw |
| Y1 | 8MHz | Two pin crystal |