Loading design…
Game-Team-SLSC
The repo for firmware and hardware and docs of the 2026 Game Team's robot for CDFR Junior
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | SQJ138EP-T1_GE3 | N-MOSFET transistor, drain/source/gate |
| U1 | BTS50010-1TAE | Smart High-Side Power Switch, PROFET, Single, 1mOhm, 40A, 18V, TO-263-7 |
| U2 | LTC4365TS8 | UV, OV and Reverse Supply Protection Controller, 50/60Hz noise rejection, TSOT23-8 |
| U3 | R-78E3.3-1.0 | 1A Step-Down DC/DC-Regulator, 6-28V input, 3.3V fixed Output Voltage, LM78xx replacement, -40°C to +85°C, SIP3 |
| U4-U7 | BTT_TMC5160T_Pro | |
| U8 | ADS1015IDGS | Ultra-Small, Low-Power, I2C-Compatible, 3.3-kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator, VSSOP-10 |
| C1 | 2200u_LowZ | Polarized capacitor |
| C2,C6,C7,C9,C10,C12,C13,C15,C16,C19-C23 | 100n | Unpolarized capacitor, small symbol |
|---|
| C3,C4,C18 | 10u | Unpolarized capacitor, small symbol |
|---|
| C5,C8,C11,C14 | 330u_LowZ | Polarized capacitor |
|---|
| D1 | SMCJ18A | Zener diode |
|---|
| D2 | 0805_Green | Light emitting diode |
|---|
| F1 | 40A | Fuse |
|---|
| FB1 | BLM21PG331SN1D | Ferrite bead, small symbol |
|---|
| J1 | XT60-M-AS | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J2,J5-J7 | XT30 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J8 | JST_XH_5 | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J9-J12 | Molex_MicroFit-3.0_4x1 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J13 | MicroFit2x12_Odd_Even | Generic connector, double row, 02x12, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J18 | Conn_02x07_Odd_Even | Generic connector, double row, 02x07, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| R1,R13-R19,R21-R23,R25-R27 | 10k | Resistor |
|---|
| R2,R41 | 100k | Resistor,Resistor, small symbol |
|---|
| R3 | 8.06M | Resistor, small symbol |
|---|
| R4 | 66.5k | Resistor, small symbol |
|---|
| R5 | 232k | Resistor |
|---|
| R6 | 150 | Resistor |
|---|
| R7 | 33R | Resistor |
|---|
| R12 | 1k | Resistor |
|---|
| R39 | 16.9k | Resistor |
|---|
| R40 | 59.0k | Resistor |
|---|
| R42,R47 | 24.9k | Resistor |
|---|
| R46 | 143k | Resistor |
|---|
| R48,R49 | 24.9K | Resistor |
|---|
| TP1-TP3 | TestPoint | test point |
|---|