quadulator
GlobalSequence
Quadulator - A quad LFO/ADSR envelope generator for Eurorack synthesizers
Components (29)
| Reference | Value | Description |
|---|---|---|
| Q1-Q4 | 2N3904 | |
| U1 | L7805 | |
| U2 | Pico | |
| U3 | MCP6004 | 1MHz, Low-Power Op Amp, DIP-14/SOIC-14/TSSOP-14 |
| U4 | CD4051B | CMOS single 8-channel analog multiplexer demultiplexer, TSSOP-16/DIP-16/SOIC-16 |
| U5,U7 | TL074 | Quad Low-Noise JFET-Input Operational Amplifiers, DIP-14/SOIC-14 |
| U6 | 74HC595 | 8-bit serial in/out Shift Register 3-State Outputs |
| C1,C2 | 10u | |
| C3,C9-C15 | 100n | Unpolarized capacitor |
| C5-C8 | 4.7n | Unpolarized capacitor |
| C16 | 470n | Unpolarized capacitor |
| D1-D5 | BAT85 | |
| D6-D13,D18 | LED | Light emitting diode |
| D14-D17 | LED_Dual_Bidirectional | Dual LED, bidirectional |
| J1 | Eurorack Power | |
| J2,J3,J5,J7 | Conn_01x08 | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4,J6,J8,J9 | Conn_01x10 | Generic connector, single row, 01x10, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10-J21 | 3.5mm jack | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| R1,R12,R15,R18,R21,R23,R25,R27,RV1-RV5 | 10k | Potentiometer, US symbol,Resistor, US symbol |
| R2,R3,R5,R7,R9,R24,R26,R28 | 100k | Resistor, US symbol |
| R4,R6,R8,R10 | 300k | Resistor, US symbol |
| R11,R14,R17,R20,R31 | 30k | Resistor, US symbol |
| R13,R16,R19,R22 | 1k | Resistor, US symbol |
| R29 | 18k | Resistor, US symbol |
| R30 | 6.8k | Resistor, US symbol |
| R32 | 12k | Resistor, US symbol |
| R33-R40,R45 | 470R | Resistor, US symbol |
| R41-R44 | 330R | Resistor, US symbol |
| SW1-SW5 | SW_Push | Push button switch, generic, two pins |