Loading design…
Gregification
Battery Management System
| Reference | Value | Description |
|---|---|---|
| U1 | MSPM0G3507 RHB32 | 80MHz Cortex-M0+, 128KB flash, 32KB SRAM, 2x4Msps ADC, DAC, 3xCOMP, 2xOPA, CAN-FD, MATHA |
| U2 | ISO1042BDW | |
| U3,U4 | KA78M05_TO252 | Positive 500mA 35V Linear Regulator, Fixed Output 5V, TO-252 (D-PAK) |
| U5 | L78L33_SO8 | Positive 100mA 30V Linear Regulator, Fixed Output 3.3V, SO-8 |
| U6 | LMV324 | Quad Low-Voltage Rail-to-Rail Output Operational Amplifier, SOIC-14/SSOP-14 |
| U7 | HBDM60V600X | |
| U8 | MCP3421A0T-ECH | Single Delta-Sigma 18bit Analog to Digital Converter, I2C Interface, SOT-23-6 |
| U9,U10 | DXTN80100CFGQ | |
| C1,C4 | 470n | Unpolarized capacitor, small symbol |
| C2,C6,C7,C14 | 10u | 50Vdc, 10%, +125C |
| C3,C15 | 100n | 50Vdc, 10%, +125C |
| C5,C11 | 220n | 50Vdc, 10%, +125C |
| D1,D4 | 18V | Zener diode, small symbol |
| D5 | GREEN | Light emitting diode |
| D6 | RED | Light emitting diode |
| D7-D16 | BAT54S | Vr 30V, If 200mA, Dual schottky barrier diode, in series, SOT-323 |
| F1 | 500mA | Fuse, small symbol |
| J1 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J2,J7,J9 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| J3 | TH | Generic connector, single row, 01x04, script generated |
| J4 | SCREW | Generic connector, single row, 01x04, script generated |
| J8 | PWM signal connectors | Generic connector, double row, 02x04, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/) |
| JP3 | Jumper_2_Open | Jumper, 2-pole, open |
| R1,R2 | 200k | Resistor, small US symbol |
| R3,R4 | 220 | Resistor, US symbol |
| R5,R6,R8-R10,R25,R26 | 100k | Resistor, US symbol,Resistor, small US symbol |
| R7 | 49.9k | 0.1% , +155C, 255mW, 200V |
| R11 | 50k | Resistor, small US symbol |
| R23,R24 | 4.99k | Resistor, US symbol |
| SW1 | SW_Push | Push button switch, generic, two pins |