stm32G0_mcu
KabelitzJ
Components (20)
| Reference | Value | Description |
|---|---|---|
| U1 | STM32G0B0KETx | STMicroelectronics Arm Cortex-M0+ MCU, 512KB flash, 144KB RAM, 64 MHz, 2.0-3.6V, 29 GPIO, LQFP32 |
| U4,U5 | SN74LVC1G14DBV | Single Schmitt NOT Gate, Low-Voltage CMOS, SOT-23 |
| U6 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U7 | FT230XS | Full Speed USB to Basic UART, SSOP-16 |
| C1,C2,C5-C7,C9,C11,C13,C14,C17 | 100n | Unpolarized capacitor |
| C3,C4 | 47p | Unpolarized capacitor |
| C8,FB2 | 10u | Ferrite bead,Unpolarized capacitor |
| D1-D4 | LED | Light emitting diode |
| D5 | D | Diode |
| J4 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J5,J7 | Conn_01x12_Pin | Generic connector, single row, 01x12, script generated |
| R1,R2 | 5k1 | Resistor |
| R3,R14 | 120 | Resistor |
| R4,R5 | 27 | Resistor |
| R6,R17-R19 | 270 | Resistor |
| R7-R9,R13,R20,R21 | 10k | Resistor |
| R11 | 22 | Resistor |
| R12 | 56k | Resistor |
| SW1 | SW_Nidec_CAS-120A1 | Switch, single pole double throw |
| SW2,SW3 | SW_Push | Push button switch, generic, two pins |