stm32f072c8_mcu
KabelitzJ
Components (23)
| Reference | Value | Description |
|---|---|---|
| U1 | 74AHC1G14 | Single Schmitt NOT Gate, Low-Voltage CMOS |
| U2 | STM32F072CBTx | STMicroelectronics Arm Cortex-M0 MCU, 128KB flash, 16KB RAM, 48 MHz, 2.0-3.6V, 37 GPIO, LQFP48 |
| U3 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U5 | AP7384-33SA | 50mA Low Dropout Voltage Regulator, Fixed Output 3.3V, Wide Input Voltage Range 40V, SOT-23 |
| C1 | 10n | Unpolarized capacitor |
| C2,C3,C10,C14 | 1u | Unpolarized capacitor |
| C4 | 10u | Unpolarized capacitor |
| C5-C9,C11,C16,C17 | 100n | Unpolarized capacitor |
| C12,C13 | 22p | Unpolarized capacitor |
| C15 | 2.2u | Unpolarized capacitor |
| D1 | APFA3010 | LED RGB, Common Anode, SMD, 3.0x1.5mm, Horizontal |
| D2 | LED | Light emitting diode |
| FB1 | 120R@100MHz | Ferrite bead |
| J1 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| J2 | Conn_01x05_Pin | Generic connector, single row, 01x05, script generated |
| J3,J4 | Conn_01x14_Socket | Generic connector, single row, 01x14, script generated |
| R1-R4,R6,R7,R15 | 10k | Resistor |
| R5 | 27 | Resistor |
| R8-R10 | 220 | Resistor |
| R11,R12 | 5k1 | Resistor |
| R13 | 50 | Resistor |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| Y1 | 16MHz | Four pin crystal, GND on pins 2 and 4 |