PCB_Kicad_Projects
Lee34667
Creating a L9110 module using PCB techniques.
Components (33)
| Reference | Value | Description |
|---|---|---|
| U1 | ESP32-S3 | Microcontroller, Wi-Fi 802.11b/g/n, Bluetooth, 32bit |
| U2 | USBLC6-2P6 | Very low capacitance ESD protection diode, 2 data-line, SOT-666 |
| U3 | W25Q128JVS | 128Mb Serial Flash Memory, Standard/Dual/Quad SPI, SOIC-8 |
| U4 | TLV76733DRVx | 1A Precision Linear Voltage Regulator, with enable pin, Fixed Output 3.3V, WSON6 |
| U5 | SN74LV1T34DBV | Single Power Supply, Single Buffer GATE, CMOS Logic, Level Shifter, SOT-23-5 |
| ANT1 | 2450AT18D0100E | |
| C1-C36,C44,C45,C48,C49,C53-C55,C57 | 0.1uF | Unpolarized capacitor, small symbol |
| C37,C42,C43,C46,C51,C52,C58 | 1uF | Unpolarized capacitor, small symbol |
| C38,C39 | NC | Unpolarized capacitor, small symbol |
| C40 | 2.4pF | Unpolarized capacitor, small symbol |
| C41 | 2.7pF | Unpolarized capacitor, small symbol |
| C47 | 2.2uF | Unpolarized capacitor, small symbol |
| C50 | 10uF | Unpolarized capacitor, small symbol |
| C56 | 10nF | Unpolarized capacitor, small symbol |
| D1-D36 | SK6805 | RGB LED with integrated controller |
| D37 | RED | Light emitting diode |
| D38 | GREEN | Light emitting diode |
| J1 | USB_C_Receptacle | USB Full-Featured Type-C Receptacle connector |
| J2 | Conn_01x03_Pin | Generic connector, single row, 01x03, script generated |
| L1 | 2.4nH | Inductor |
| L2 | 2nH | Inductor |
| R1-R5 | 0 | Resistor, small symbol |
| R6,R7,R14,R16,R17 | 5K1 | Resistor, small symbol |
| R8-R12 | 10K | Resistor, small symbol |
| R13 | 22 | Resistor, small symbol |
| R15 | 5k1 | Resistor, small symbol |
| SW1 | btn4 | Push button switch, generic, two pins |
| SW2 | btn3 | Push button switch, generic, two pins |
| SW3 | btn2 | Push button switch, generic, two pins |
| SW4 | btn5 | Push button switch, generic, two pins |
| SW5 | btn1 | Push button switch, generic, two pins |
| TP1-TP7 | TestPoint | test point |
| Y1 | Crystal_GND24_Small | Four pin crystal, GND on pins 2 and 4, small symbol |