Synth
Len42
Eurorack synthesizer module designs
Components (30)
| Reference | Value | Description |
|---|---|---|
| Q1-Q4 | 2N3904 | Small Signal NPN Transistor, 0.2A Ic, 40V Vce, TO-92 |
| U1,U2 | TL074 | Quad Low-Noise JFET-Input Operational Amplifiers, DIP-14/SOIC-14 |
| A1 | Cable_Eurorack_10 | Eurorack 16-10 pin power cable |
| C1,C5 | 10N | Capacitor - Film |
| C2,C6 | 470N | Capacitor - Film |
| C3,C7 | 47P | Capacitor - Ceramic |
| C4,C8 | 3N3 | Capacitor - Film |
| C9,C10 | 10U | Capacitor - Electrolytic - 12 V decoupling |
| C11-C14 | 100N | Capacitor - Ceramic - IC decoupling |
| D1,D2 | LED_3mm_Blue | Blue Light Emitting Diode |
| J1-J4 | WQP-PJ398 | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling), QingPu / Thonkiconn |
| J5 | Conn_Eurorack_10 | Eurorack 10-pin board power connector |
| J6 | Conn_Front | Generic connector, single row, 01x17, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | Conn_Back | Generic connector, single row, 01x17, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R21 | 300K | Resistor |
| R2,R7,R20,R22,R27,R40,RV3,RV4 | 100K | Potentiometer,Resistor |
| R3,R23 | 4M7 | Resistor |
| R4,R24 | 200K | Resistor |
| R5,R25 | 11K | Resistor |
| R6,R9,R12,R26,R29,R32 | 10K | Resistor |
| R8,R28 | 2K2 | Resistor |
| R10,R30,R41,R43 | 220R | Resistor |
| R11,R31 | 68K | Resistor |
| R13,R33 | 470R | Resistor |
| R14,R15,R19,R34,R35,R39 | 36K | Resistor |
| R16,R36 | 51R | Resistor |
| R17,R18,R37,R38 | 220K | Resistor |
| R42,R44 | 1K | Resistor |
| RV1,RV2 | 25K | Trim-potentiometer |
| SW1,SW2 | SPDT_ON_ON | Switch, single pole double throw sub-mini toggle |