STM32XP
MechatronixLab
Development board based on the STM32F411RET6
Components (22)
| Reference | Value | Description |
|---|---|---|
| U1 | STM32F411RETx | STMicroelectronics Arm Cortex-M4 MCU, 512KB flash, 128KB RAM, 100 MHz, 1.7-3.6V, 50 GPIO, LQFP64 |
| U2 | ADS1115IDGS | Ultra-Small, Low-Power, I2C-Compatible, 860-SPS, 16-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator, VSSOP-10 |
| U3 | LM324 | Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14 |
| U4 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| BT1 | Battery_Cell | Single-cell battery |
| C1-C5,C8 | 100nF 50V | Unpolarized capacitor, small symbol |
| C6,C7,C11 | 10uF 25V | Unpolarized capacitor, small symbol |
| C9,C10 | 10pF 50V | Unpolarized capacitor, small symbol |
| D1 | WS2812B | RGB LED with integrated controller |
| H1-H4 | MountingHole | Mounting Hole without connection |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2 | Micro_SD_Card | Micro SD Card Socket |
| J3,J4 | Conn_01x20_Socket | Generic connector, single row, 01x20, script generated |
| J5 | Jack-DC | DC Barrel Jack with an internal switch |
| J9 | Conn_02x05_Odd_Even | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | L_Small | Inductor, small symbol |
| R1 | 10K 1% | Resistor, US symbol |
| R2 | 0R | Resistor, US symbol |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| SW3 | RST | Push button switch, generic, two pins |
| Y1 | 32.768kHz | Two pin crystal |
| Y2 | 8MHz xpF | Four pin crystal, GND on pins 2 and 4 |