Loading design…
| Reference | Value | Description |
|---|---|---|
| U1 | W25Q128JVPIQ | |
| U4,U6 | TLV76733DRVR | |
| U5 | RP235x-B | |
| U7 | 6N138 | Low Input Current high Gain Split Darlington Optocouplers, -0.5V to 7V VDD, DIP-8 |
| U8 | SGTL5000XNLA3 | Low Power Stereo Codec with Headphone Amp, QFN-20 |
| U10 | LP5907MFX-1.8 | 250-mA Ultra-Low-Noise Low-IQ LDO, 1.8V, SOT-23 |
| USB1 | TYPE-C_16PIN_2MD(073) |
| C1-C3,C21 | 1u | Unpolarized capacitor |
|---|
| C4,C22 | 22u 0805 |
|---|
| C5,C6 | 12pF |
|---|
| C7-C13,C15,C18-C20,C35-C37 | 0.1uF |
|---|
| C14,C16 | 4.7uF |
|---|
| C17 | 10uF |
|---|
| C23,C24,C29-C31,C34 | 100n | Unpolarized capacitor |
|---|
| C25 | 2.2u | Unpolarized capacitor |
|---|
| C26 | 100n COG | Unpolarized capacitor |
|---|
| C27,C28,C32,C33 | 1u Film | Unpolarized capacitor |
|---|
| CN1 | MIDI In |
|---|
| CN2 | MIDI Out |
|---|
| D1 | 1N4148WS | 75V 0.15A Fast switching Diode, SOD-323 |
|---|
| D2 | LED Test |
|---|
| D3,D4 | 1N5817 | 20V 1A Schottky Barrier Rectifier Diode, DO-41 |
|---|
| J2 | Custom Cx | Generic connector, double row, 02x08, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3 | ADC Cx | Generic connector, double row, 02x08, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J4 | GPIO B Cx | Generic connector, double row, 02x08, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J5 | GPIO A Cx | Generic connector, double row, 02x08, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J6 | Joystick Cx | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J7 | Conn_Power | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J8 | Conn_Pi_SWD |
|---|
| J9 | mic | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J10 | Line In R |
|---|
| J11 | Line In L |
|---|
| J12 | SPI1 header | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J13 | Micro_SD_Card_Det_Hirose_DM3AT | Micro SD Card Socket with card detection pins |
|---|
| J14 | Conn_I2C | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J15 | Line In Cx | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J17 | Headphone Cx | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J18 | Line Out R |
|---|
| J19 | Line Out L |
|---|
| J20 | Line Out Cx | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J21 | Conn_Power_Ext | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| L1 | 3.3uH | AOTA-B201610S3R3-101-T |
|---|
| R1,R4,R18,R19 | 5.1k |
|---|
| R2,R3,R8 | 100K |
|---|
| R5-R7 | 27R |
|---|
| R9 | 2K |
|---|
| R10 | 220 | Resistor |
|---|
| R11,R12 | 47 | Resistor |
|---|
| R13 | 470 | Resistor |
|---|
| R14,R16,R17 | 2.2k | Resistor |
|---|
| R15 | 100 | Resistor |
|---|
| R20 | 0R0 | Resistor |
|---|
| R21 | 1.5k |
|---|
| RV_Gain1,RV_X1,RV_Y1,RV_Z1 | 100k |
|---|
| S1 | PEC11R-4215F-S0024 | ROTARY ENCODER MECHANICAL 24PPR |
|---|
| SW1,SW2 | SW on-on toggle | Switch, single pole double throw |
|---|
| SW3,SW4 | SW Momentary (on)-off-(on) 1MS4T1B1M1QES | Switch, single pole double throw |
|---|
| Y1 | CM4012M00012001 |
|---|
