Loading design…
NAIT-CNT-CMPE2750-1241-A02
Demos used in this course, including the sample project.
| Reference | Value | Description |
|---|---|---|
| U1 | MCP73831-2-OT | Single cell, Li-Ion/Li-Po charge management controller, 4.20V, Tri-State Status Output, in SOT23-5 package |
| U2 | MIC5301-3.3YD5 | |
| U3 | STM32G041F8Px | STMicroelectronics Arm Cortex-M0+ MCU, 64KB flash, 8KB RAM, 64 MHz, 1.7-3.6V, 18 GPIO, TSSOP20 |
| U4 | ADXL343BCCZ | |
| C1,C6,C11,C12 | 0.1uF | Unpolarized capacitor, small symbol |
| C2 | 4.7uF | Unpolarized capacitor, small symbol |
| C3,C4 | 12.5pF | Unpolarized capacitor, small symbol |
| C5 | 4.7nF 1KV | Unpolarized capacitor, small symbol |
| C7,C10 | 1uF CER | |
| C8 | 1uF | Unpolarized capacitor, small symbol |
| C9 | 0.01uF | Unpolarized capacitor, small symbol |
| CR1,CR2 | LSM115JE3/TR13 | |
| D1 | Power | |
| D2 | Green Indicator | |
| D3 | Red indicator |
| D4 | SSD1306 |
|---|
| J1 | USB_B_Micro |
|---|
| J2 | S2B-PH-K-S | Generic connector, single row, 01x02, script generated |
|---|
| J3 | Conn_02x02_Odd_Even | Generic connector, double row, 02x02, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J4 | Conn_ST_STDC14 | ST Debug Connector, standard ARM Cortex-M SWD and JTAG interface plus UART |
|---|
| R1 | 1M | Resistor, small US symbol |
|---|
| R2 | 5K |
|---|
| R3-R5 | 470 |
|---|
| R6-R11 | 10K | Resistor, small US symbol |
|---|
| SW1 | Reset |
|---|
| SW2 | Up |
|---|
| SW3 | Enter |
|---|
| SW4 | Down |
|---|
| Y1 | Crystal | Two pin crystal |
|---|