SX1262-Devboard
NBER08
A development board for the Semtech sx1262 LoRa chip.
Components (28)
| Reference | Value | Description |
|---|---|---|
| IC1 | 114993390 | RF Modules Wio-SX1262 Wireless Module (Bulk), SX1262 embedded, supports LoRa&LoRaWAN on EU868 & US915 |
| U1 | NPM1304-QEAA-R | |
| U2 | E73-2G4M08S1C | nRF52840 2.4GHZ SMD Wireless Module |
| U3 | SRV05-4 | ESD Protection Diodes with Low Clamping Voltage, SOT-23-6 |
| BT1 | 1S Lipo | Single-cell battery |
| C1,C4,C6,C7,C10,C11 | 10u | Unpolarized capacitor |
| C2,C3 | 0.1u | Unpolarized capacitor |
| C5,C8 | 1u | Unpolarized capacitor |
| C9,L1,L2 | 2u2 | Inductor, small symbol,Unpolarized capacitor |
| C12,C13 | 22p | Unpolarized capacitor |
| D1-D3 | Amber | Light emitting diode, small symbol |
| FB1 | LI0603G121R-10 | Ferrite bead |
| J1 | 693071010811 | |
| J2 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J3 | SWD | |
| J4 | RMF | Generic connector, single row, 01x02, script generated |
| J5 | EXT_PIN | Generic connector, single row, 01x03, script generated |
| R1,R2 | 4k7 | Resistor |
| R3 | 150k | Resistor |
| R4-R7 | 47k | Resistor |
| R8-R10 | 300 | Resistor, small symbol |
| SW1 | SHPHLD | Push button switch, generic, two pins |
| SW2 | SW_Push | Push button switch, generic, two pins |
| SW3 | RST | Push button switch, generic, two pins |
| TP1 | VMCU | test point |
| TP2 | 3V3 | test point |
| TP3 | VSYS | test point |
| Y1 | 32.768 | Two pin crystal |