JedlikBots
NBence0
Components (68)
| Reference | Value | Description |
|---|---|---|
| Module1 | ComputeModule4 | |
| Q1,Q2 | SS8050-G | 0.8A Ic, 45V Vce, NPN Transistor, SOT-23 |
| U1,U2,U4,U35,U39 | TPD4EUSB30 | 4-Channel ESD Protection for Super-Speed USB 3.0 Interface, USON-10 |
| U3 | MagJack-A70-112-331N126 | |
| U5,U9 | 74LVC1G07SE-7 | Single Buffer Gate w/ Open Drain, Low-Voltage CMOS |
| U6 | USB2514B-I/M2 | USB 2.0 Hi-Speed Hub Controller |
| U7 | AP22653W6 | |
| U8 | ESP32-S3-WROOM-2 | RF Module, 2.4 GHz, Wi-Fi, Bluetooth, BLE, ESP32-S3R8V |
| U10,U14,U16,U48 | AP64501SP-13 | |
| U11 | EMC2301-1-ACZL-TR | |
| U12 | RT9742SNGV | |
| U13,U38,U40 | FSUSB42MUX | |
| U15 | CH343P | |
| U17,U19-U33 | INA226 | High-Side or Low-Side Measurement, Bi-Directional Current and Power Monitor (0-36V) with I2C Compatible Interface, VSSOP-10 |
| U18 | RT9742GGJ5 | |
| U34,U36,U47 | ADS1115IDGS | Ultra-Small, Low-Power, I2C-Compatible, 860-SPS, 16-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator, VSSOP-10 |
| U37,U41,U46 | ADC1283 | Low power 8-channel single ended 12-bit SAR ADC, 50 ksps to 200 ksps, SPI, TSSOP-16 |
| U42-U44,U51 | TMC2240_SILENTSTEPSTICK | |
| C1,C12-C15,C22-C24,C30,C31 | 100n | Unpolarized capacitor |
| C2,C5 | 10u | Unpolarized capacitor |
| C3,C7 | 100nf | Unpolarized capacitor |
| C4 | 1uf | Unpolarized capacitor |
| C6 | 100u | Unpolarized capacitor |
| C8,C9 | 27pF | Unpolarized capacitor |
| C10 | 100uf | Unpolarized capacitor |
| C11,C21,C29 | 10u 35v | Unpolarized capacitor |
| C16,C20,C28,C35 | 100uF | |
| C17,C19,C25,C27,C32,C34,R4,R17,R18 | nf | Resistor,Unpolarized capacitor |
| C18,C26,C33 | 1.2nF | Unpolarized capacitor |
| C36-C39 | C_Polarized | Polarized capacitor |
| D1 | LED Red | Light emitting diode |
| D2 | LED Green | Light emitting diode |
| D3 | WS2812B | RGB LED with integrated controller |
| D4-D10 | LED | Light emitting diode |
| FB1 | FerriteBead | Ferrite bead |
| J1,J3 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | Conn_02x07_Odd_Even | Generic connector, double row, 02x07, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4,J5,J15,J16 | Conn_01x22_Female | |
| J6,J9 | THD-02-R | Generic connector, double row, 02x02, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | Micro_SD_Card_Det | |
| J8 | THD-20-R | Generic connector, double row, 02x20, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10,J22 | 690-019-298-412 | HDMI 1.4+ type A connector |
| J13 | 690-008-221-904 | |
| J17 | Molex 470531000 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J18 | Conn_01x12_Pin | Generic connector, single row, 01x12, script generated |
| J19,J20,J23 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| L1-L3 | SRN6045TA-3R3Y | |
| M1-M4 | Stepper_Motor_unipolar_6pin | 6-wire unipolar stepper motor |
| R1,R10,R37,R38,R44 | 1k | Resistor |
| R2,R3 | 470R | Resistor |
| R5 | 0R | Resistor |
| R6-R8,R11,R28,R62,R63,R66,R67 | 2.2K 1% | Resistor |
| R9,R22,R35 | 10R | Resistor |
| R12-R14,R16,R21 | 36K 1% | Resistor |
| R15,R23,R25,R27,R29 | 12K 1% | Resistor |
| R19,R31,R64,R65,R68,R69 | 5.1K 1% | Resistor |
| R20,R34,R40-R43,R71,R73-R76 | 10k | Resistor |
| R24 | 47K 1% | Resistor |
| R26,R47-R61 | 0.025Ω | Resistor |
| R30,R36 | 15K 1% | Resistor |
| R32,R33,R70,R72 | 320 | Resistor |
| R39 | 33K 1% | Resistor |
| R45 | 13K 1% | Resistor |
| R46 | 110K 1% | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| TH1,TH2 | Thermistor_NTC | Temperature dependent resistor, negative temperature coefficient |
| TP1,TP3-TP5,TP7 | TestPoint | test point |
| Y1 | 24MHz | Two pin crystal |