Loading design…
NTURacingTeam
kicad files
| Reference | Value | Description |
|---|---|---|
| IC1 | LMR50410Y3FQDBVRQ1 | LMR50410Y3FQDBVRQ1 |
| U1 | STM32F103C8Tx | STMicroelectronics Arm Cortex-M3 MCU, 64KB flash, 20KB RAM, 72 MHz, 2.0-3.6V, 37 GPIO, LQFP48 |
| U2 | LM66100DCK | Ideal Diode With Input Polarity Protection 1.5 - 5.5V Input Voltage, 1.5A Output Current, Ron 141 mOhm, SC-70-6 |
| U3 | RT9193 | SOT-23-5 3.3V 300mA low dropout voltage regulator with enable and reference bypass, Alternate KiCad Library |
| U4 | LSM6DSO32 | I2C/SPI, iNEMO inertial module: always-on 3D accelerometer and 3D gyroscope |
| U11 | TCAN1042VDRQ1 | |
| C1-C4 | 10u 6V | Unpolarized capacitor, small symbol |
| C5-C8,C11,C65,C66,C89,C90,C93 | 0u1 | Unpolarized capacitor, small symbol |
| C9,C10 | 30p | Unpolarized capacitor, small symbol |
| C12,C13 | 1u | Unpolarized capacitor, small symbol |
| C14 | 22n | Unpolarized capacitor, small symbol |
| C15,C16 | 22u 25V | Unpolarized capacitor, small symbol |
| C45 | 10u 35V | Unpolarized capacitor, small symbol |
| D1 | 5.7V MMSZ5233B-7-F | Zener diode, small symbol |
| D2 | RED 24V | Light emitting diode |
| D3 | RED 5V | Light emitting diode |
| D4 | WHITE LED | Light emitting diode |
| D5 | GREEN LED | Light emitting diode |
| D6 | YELLOW LED | Light emitting diode |
| D16 | BLUE LED | Light emitting diode |
| D32 | 27V MMSZ5254B-7-F | Zener diode, small symbol |
| F1 | 0.5A | Fuse, small symbol |
| FL1 | ACM70V-701-2PL-TL00 | Common Mode Choke 700R 4A R015 SMD TDK ACM-V Series Shielded SMD Common Mode Line Filter with a Ferrite Core, Wire-Wound 4A Idc |
| J1 | USB_C_stm32 | USB 2.0-only 16P Type-C Receptacle connector |
| J2 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | STDC14 | Generic connector, double row, 02x07, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | CAN | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L5 | 47u 1.6A (SRN6045TA-470M) | Inductor, small symbol |
| R1,R2 | 20R | Resistor, small symbol |
| R3,R7,R12,R13 | 1k | Resistor, small symbol |
| R4,R76,R77 | 100R | Resistor, small symbol |
| R5,R6,R8,R17,R19,R20 | 10k | Resistor, small symbol |
| R9,R10 | 5k1 | Resistor, small symbol |
| R11 | 8k2 | Resistor, small symbol |
| R18 | 2k | Resistor, small symbol |
| R72,R74 | 3k3 | Resistor, small symbol |
| Y1 | 8MHz X49SM8MSD2SC | Two pin crystal |