nturt_kicad
NTURacingTeam
kicad files
Components (28)
| Reference | Value | Description |
|---|---|---|
| U1 | ACS756xCB-100B-PFF | ±100A Bidirectional Hall-Effect Current Sensor, +5.0V supply, 20mV/A, CB-5 PFF |
| U2 | STM32F103C8Tx | STMicroelectronics Arm Cortex-M3 MCU, 64KB flash, 20KB RAM, 72 MHz, 2.0-3.6V, 37 GPIO, LQFP48 |
| U3 | XC6206PxxxMR | Positive 60-250mA Low Dropout Regulator, Fixed Output, SOT-23 |
| U4 | TCAN1042VDRQ1 | |
| C1-C4,C14 | 10u 6V | Unpolarized capacitor, small symbol |
| C5-C8,C11-C13 | 0u1 | Unpolarized capacitor, small symbol |
| C9,C10 | 1u | Unpolarized capacitor, small symbol |
| D1 | WHITE | Light emitting diode, small symbol |
| D2 | NUP2105L | Dual Line CAN Bus Protector, 24Vrwm |
| FL1 | EXC-X4CE900U | Series/Type: Common mode Filters (0202 small size), Size [LW] (mm): 0.650.50, Height (mm): 0.3, Impedance [Common Mode] (): 90, Rated Voltage [DC] (V): 5, Rated Current [DC] (mA): 100, DC Resistance [max.] (): 3.0+/-30%, Number of circuit: 1 |
| J2 | 5V&CAN | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1 | 10k | Resistor, small symbol |
| R2-R4 | 100R | Resistor, small symbol |
| R5 | 1k | Resistor, small symbol |
| R6 | 120R | Resistor, small symbol |
| SW1 | RESET | Push button switch, generic, two pins |
| TP1 | Vout | test point |
| TP2 | CAN1_STB | test point |
| TP3 | CANH | test point |
| TP4 | CANL | test point |
| TP5 | CAN1_RX | test point |
| TP6 | CAN1_TX | test point |
| TP7 | SWDIO | test point (alternative shape) |
| TP8 | SWCLK | test point (alternative shape) |
| TP9 | TX | test point (alternative shape) |
| TP10 | RX | test point (alternative shape) |
| TP11 | 3V3 | test point |
| TP12 | GND | test point |