Loading design…
Napkin-to-Billboard
100 Gadget Ideas - Napkin to Billboard
| Reference | Value | Description |
|---|---|---|
| Q3 | BC817 | 0.8A Ic, 45V Vce, NPN Transistor, SOT-23 |
| U1 | ETA1061 | 1~1.4MHz 1A 1uA 550mV~5V Adjustable Boost DC-DC Converter |
| U5 | TLV2372 | Dual Rail-to-Rail Input/Output Operational Amplifier, DIP-8/SOIC-8/VSSOP-8 |
| U6 | TP4056 | 1A Standalone Linear Li-ion/LiPo single-cell battery charger, 4.2V ±1% charge voltage, VCC = 4.0..8.0V, SOIC-8 (SOP-8) |
| U9 | ESP32-S2-MINI-2 | |
| U10 | TLV62565DBVx | 2.7-V to 5.5-V input, EN Input, 1.5-A step-down converter, SOT-23-5 |
| U16 |
| U19 | FM8002 |
|---|
| C1,C37,C44 | 22uF | Unpolarized capacitor |
|---|
| C2-C9,C46,C47,C92 | 100nF | Unpolarized capacitor |
|---|
| C10,C12-C14,C41 | 10uF-10V | 10V 10uF X5R ±10% 0603 |
|---|
| C11 | 22pF | Unpolarized capacitor |
|---|
| C15-C17 | 100uF | 100uF 16V 5.4mm 6.3mm ±20% SMD,D6.3xL5.4mm Aluminum Electrolytic Capacitors - SMD |
|---|
| C18,C27,C29-C34,C42,C43,C79,C80,C89-C91 | 1uF | Unpolarized capacitor |
|---|
| D1-D6 | WS2812B-2020 | RGB LED with integrated controller, 2.0 x 2.0 mm, 12 mA |
|---|
| D18 | RED | Light emitting diode |
|---|
| D19 | BLUE | Light emitting diode |
|---|
| D25 | D | Diode |
|---|
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
|---|
| J2 | Conn_01x08_Socket | Generic connector, single row, 01x08, script generated |
|---|
| J3 | OLED | Generic connector, single row, 01x04, script generated |
|---|
| J4,J6 | Conn_02x03_Odd_Even | Generic connector, double row, 02x03, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J5 | Conn_02x04_Odd_Even | Generic connector, double row, 02x04, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J7,J26 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J19 | Conn_01x08_Pin | Generic connector, single row, 01x08, script generated |
|---|
| L1,L2 | 2.2uH | Inductor |
|---|
| R1-R3,R61,R64,R65,R100,R101,R121,R124,R125 | 5K1 | Resistor |
|---|
| R4,R26-R28,R30,R35,R36 | 470K | Resistor |
|---|
| R5 | 953K | Resistor |
|---|
| R29,R31-R34,R59,R62,R122 | 47K | Resistor |
|---|
| R52,R54,R57,R58,R63,R107,R123 | 1K | Resistor |
|---|
| R60 | 215K | Resistor |
|---|
| R67,R68,R96-R99,R108 | 27R | Resistor |
|---|
| RV4 | R_Potentiometer | Potentiometer |
|---|
| SW0 | SW_SPST | Single Pole Single Throw (SPST) switch |
|---|
| SW23 | SW_SPDT_321 | Switch, single pole double throw |
|---|
| SW25 | BOOTSEL | Single Pole Single Throw (SPST) switch |
|---|
| SW38 | RESET | Single Pole Single Throw (SPST) switch |
|---|