Loading design…
Napkin-to-Billboard
100 Gadget Ideas - Napkin to Billboard
| Reference | Value | Description |
|---|---|---|
| Q1 | Crystal_GND24 | Four pin crystal, GND on pins 2 and 4 |
| Q2-Q5 | BC817 | 0.8A Ic, 45V Vce, NPN Transistor, SOT-23 |
| U1 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U2 | ESP32-S2-MINI-1 | ESP32-S2-MINI-1 and ESP32-S2-MINI-1U are two powerful, generic Wi-Fi MCU modules that have a rich set of peripherals. They are an ideal choice for a wide variety of application scenarios relating to Internet of Things (IoT), wearable electronics and smart home. |
| U3 | RP2040 | A microcontroller by Raspberry Pi |
| U4 | MT3608L | |
| U5,U18 |
| Dual Rail-to-Rail Input/Output Operational Amplifier, DIP-8/SOIC-8/VSSOP-8 |
| U6,U12 | TP4056 | 1A Standalone Linear Li-ion/LiPo single-cell battery charger, 4.2V ±1% charge voltage, VCC = 4.0..8.0V, SOIC-8 (SOP-8) |
|---|
| U7,U15 | LIS2DH | 3-Axis Accelerometer, 2/4/8/16g range, I2C/SPI interface, LGA-14 |
|---|
| U8 | W25Q128JVS | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 |
|---|
| U9 | ESP32-S2-MINI-2 |
|---|
| U10,U13 | TLV62565DBVx | 2.7-V to 5.5-V input, EN Input, 1.5-A step-down converter, SOT-23-5 |
|---|
| U14,U19 | FM8002 |
|---|
| U16,U17 | LMA3722T421-OA5 |
|---|
| C1,C9,C35-C38,C40,C41,C44,C45,C62,C66-C69,C72 | 22uF | Unpolarized capacitor |
|---|
| C2-C8,C10-C12,C15-C18,C21,C25,C26,C46-C53,C55-C60,C63-C65,C71,C73,C77,C78,C92 | 100nF | Unpolarized capacitor |
|---|
| C13,C14,C22-C24,C27-C34,C39,C42,C43,C54,C61,C70,C74-C76,C79-C91 | 1uF | Unpolarized capacitor |
|---|
| C19,C20 | 15pF | Unpolarized capacitor |
|---|
| D1,D24 | TEMD7000X01 | Silicon PIN Photodiode, Area 0.23mmsq |
|---|
| D2,D15-D17 | RED LED | Light emitting diode |
|---|
| D3,D14,D22,D25 | D | Diode |
|---|
| D4-D13,D23 | WS2812B-2020 | C965555 |
|---|
| D18,D20 | RED | Light emitting diode |
|---|
| D19,D21 | BLUE | Light emitting diode |
|---|
| J1,J22,J23 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
|---|
| J2,J20,J21 | Conn_01x08_Socket | Generic connector, single row, 01x08, script generated |
|---|
| J3,J6,J7 | OLED | Generic connector, single row, 01x04, script generated |
|---|
| J4,J5,J15,J28 | Conn_02x04_Odd_Even | Generic connector, double row, 02x04, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J19 | Conn_01x08_Pin | Generic connector, single row, 01x08, script generated |
|---|
| J25-J27 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| L1,L3 | 2.2uH | Inductor |
|---|
| L2 | 10uH | Inductor |
|---|
| R1-R3,R5-R8,R12-R14,R17-R21,R38,R39,R46,R49,R61,R64,R65,R79-R81,R91,R92,R94,R100-R106,R121,R124,R125 | 5K1 | Resistor |
|---|
| R4,R50-R58,R63,R66,R75,R84-R87,R90,R95,R107,R110,R123 | 1K | Resistor |
|---|
| R15,R16,R24,R25,R37,R67,R68,R77,R78,R96-R99,R108 | 27R | Resistor |
|---|
| R22,R88 | DNP | Resistor |
|---|
| R23,R26-R36,R40-R45,R47,R48,R59,R62,R69-R74,R76,R82,R93,R109,R111-R120,R122 | 47K | Resistor |
|---|
| R60,R83 | 215K | Resistor |
|---|
| RV1-RV4,RV8,RV9 | R_Potentiometer | Potentiometer |
|---|
| SW0-SW16,SW19-SW22,SW26-SW34 | SW_SPST | Single Pole Single Throw (SPST) switch |
|---|
| SW17,SW37,SW38 | RESET | Single Pole Single Throw (SPST) switch |
|---|
| SW18,SW25,SW36 | BOOTSEL | Single Pole Single Throw (SPST) switch |
|---|
| SW23,SW24,SW35 | SW_SPDT_321 | Switch, single pole double throw |
|---|