OpenKNX-UP1
OpenKNX
OpenKNX system UP1
Components (28)
| Reference | Value | Description |
|---|---|---|
| U40 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U60 | TPS7A4901DGN | High voltage low-dropout linear regulator |
| U61,U62 | Digital Isolator | Dual-channel digital isolator, bidirectional communication, 3V/5V level translation, SOIC-8 |
| U63 | LTV-217-B-G | DC Optocoupler |
| U100 | RP2040 | A microcontroller by Raspberry Pi |
| U101 | W25Q | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 |
| U102 | MAX803R | reset ic 2.63V |
| C40 | 10uF/6.3V | Unpolarized capacitor, small symbol |
| C41 | C_Polarized | Polarized capacitor |
| C60,C62,C109 | 10uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C61,C63-C67,C103,C105,C110-C115,C131,C132 | 100nF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C101,C102 | 33p | Unpolarized capacitor |
| C120,C130 | 1uF | Unpolarized capacitor |
| D60,D61 | BAS70-05 | Dual Schottky diode, common cathode on pin 3 |
| D101 | LED | Light emitting diode |
| GN100 | OpenKNX NanoBCU | |
| J40 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J60 | Conn_01x05 | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J101 | Conn_01x10 | Generic connector, single row, 01x10, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R40,R41,R107,R108 | 22 | Resistor |
| R60 | 47k | Resistor |
| R61 | 15k | Resistor |
| R62 | 12k | Resistor |
| R63-R65,R67 | 470 | Resistor |
| R66,R101-R103,R105 | 1k | Resistor |
| R106 | 220 | Resistor |
| SW100 | Prog | Push button switch, generic, two pins |
| Y100 | 12MHz | Four pin crystal, GND on pins 2 and 4 |