OpenSkyhawk
OpenSkyHawk
DCS A-4E Skyhawk home cockpit — 3D-printed panels, custom PCBs, STM32/RP2040 firmware
Components (28)
| Reference | Value | Description |
|---|---|---|
| U1 | STM32F103C8Tx | STMicroelectronics Arm Cortex-M3 MCU, 64KB flash, 20KB RAM, 72 MHz, 2.0-3.6V, 37 GPIO, LQFP48 |
| U2 | SN65HVD230 | CAN Bus Transceivers, 3.3V, 1Mbps, Low-Power capabilities, SOIC-8 |
| U3 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U4 | RP2040-ZERO | Low-Cost, High-Performance Pico-Like MCU Board Based On Raspberry Pi Microcontroller RP2040 |
| C1-C6,C9,C12,C14 | 100nF | Unpolarized capacitor |
| C7,C8 | 22pF | Unpolarized capacitor |
| C10 | 1uF | Unpolarized capacitor |
| C11 | 10uF | Polarized capacitor |
| C13,C15 | 22uF | Polarized capacitor,Polarized capacitor, small symbol |
| D1,D3,D5 | GREEN | Light emitting diode |
| D2,D4 | RED | Light emitting diode |
| D6 | SMBJ6.0A | 600W, 6V, Unidirectional, TVS |
| D7 | SMBJ12A | 600W, 12V, Unidirectional, TVS |
| J1 | J_DIAG | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | J_I2C2 |