YR_0.3.1
PROTONMM
Components (18)
| Reference | Value | Description |
|---|---|---|
| U1,U3 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U2 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| C1,C3-C8,C10,C11 | 100n | Unpolarized capacitor |
| C2,C9,C12 | 10u | Polarized capacitor |
| J1 | UART | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | POWER | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | SSD1322 | Generic connector, double row, 02x08, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | GND | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | 3.3V | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | GPIO | Generic connector, single row, 01x14, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | Encoder 2 | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | PCM5102A | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9 | WeAct PCM5100A | Generic connector, single row, 01x07, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1-R8 | 10k | Resistor |
| R9 | 10R | Resistor |
| S1 | RST | Push button switch, generic, two pins |
| S2 | BOOT | Push button switch, generic, two pins |
| SW1 | RotaryEncoder_Switch_MP | Rotary encoder, dual channel, incremental quadrate outputs, with switch and MP Pin |