Loading design…
Prodibb28
| Reference | Value | Description |
|---|---|---|
| U1,U2 | MCP6004 | 1MHz, Low-Power Op Amp, DIP-14/SOIC-14/TSSOP-14 |
| U3 | CD4053B | CMOS triple 2-channel analog multiplexer/demultiplexer, TSSOP-16/DIP-16/SOIC-16 |
| U4 | VIPer22ADIP-E | Low power OFF-line SMPS primary switcher |
| U5 | LN5016 | |
| U6 | AMS1117-5.0 | 1A Low Dropout regulator, positive, 5.0V fixed output, SOT-223 |
| U7 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U8 | ESP32-WROOM-32 | RF Module, ESP32-D0WDQ6 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| U9 | MCP3208 | A/D Converter, 12-Bit, 8-Channel, SPI Interface , 2.7V-5.5V |
| U10 | LM4040LP-2.5 | 2.500V Precision Micropower Shunt Voltage Reference, TO-92 |
| C1,C4,C10-C13 | 1nF | Unpolarized capacitor, small symbol |
| C2,C3,C5-C9 | 100pF | Unpolarized capacitor, small symbol |
| C14,C15 | 10uF 400V | Polarized capacitor |
| C16,C20,C21 | 100nF 25V | Unpolarized capacitor, small symbol |
| C17 | 4.7uF 25V | Unpolarized capacitor, small symbol |
| C18 | 4.7uF 35V | Unpolarized capacitor, small symbol |
| C19,C22,C23,C25,C27,C30 | 22uF 25V | Polarized capacitor,Unpolarized capacitor, small symbol |
| C24,C26,C28,C29 | 1nF 25V | Unpolarized capacitor, small symbol |
| D1 | 1N4007G | Diode, filled shape |
| D2 | BZT52C16V | Zener diode, filled shape |
| D3,D4 | D_Filled | Diode, filled shape |
| D5,D6 | LED_Small_Filled | Light emitting diode, small symbol, filled shape |
| J1 | AC_INPUT | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | CT1 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | CT2 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | USB | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 470uH | Inductor |
| L2 | 1mH | Inductor |
| L3 | 10uH | Inductor |
| R1,R9,R23,R24,R26,R27 | 300k | Resistor |
| R2,R10 | 390k | Resistor |
| R3-R6,R11-R13,R15,R18,R21,R30,R33 | 5k1 | Resistor |
| R7,R14,R41,R42 | 10k | Resistor |
| R8,R16,R17,R25,R32 | 100 | Resistor |
| R19,R20,R28,R29 | 20k | Resistor |
| R22,R31,R35 | 1k | Resistor |
| R34,R44 | 1K | Resistor |
| R36 | 100k | Resistor |
| R37 | 200k | Resistor |
| R38 | 24k | Resistor |
| R39,R40 | 10K | Resistor |
| R43 | 3k3 | Resistor |
| RV1 | 05D391K | |
| SW1 | EN | Push button switch, generic, two pins |
| SW2 | BOOT | Push button switch, generic, two pins |
| TH1 | NTC 10D5 |