MOTORCYCLE_MCU_PCB
R7J7R7M
This project contains the PCB design of the motorcycle device
Components (23)
| Reference | Value | Description |
|---|---|---|
| U1 | ESP32-WROOM-32 | RF Module, ESP32-D0WDQ6 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| U4 | AMS1117-5.0 | 1A Low Dropout regulator, positive, 5.0V fixed output, SOT-223 |
| U5 | ULN2003A | High Voltage, High Current Darlington Transistor Arrays, SOIC16/SOIC16W/DIP16/TSSOP16 |
| U13 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| C4 | 10uf | Unpolarized capacitor |
| C5 | 22uf | Unpolarized capacitor |
| C6 | 10uF | Unpolarized capacitor |
| C7 | 22uF | Unpolarized capacitor |
| CON1 | MIKROBUS_HOST_CONN | MikroClick connector |
| D4 | Power LED | Light emitting diode |
| D5 | LED_ARGB | RGB LED, anode/red/green/blue |
| F1-F3 | Fuse | Fuse |
| J1,J2,J18 | Conn_01x03_Pin | Generic connector, single row, 01x03, script generated |
| J3,J8 | Conn_01x08_Pin | Generic connector, single row, 01x08, script generated |
| J4,J10-J17 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| J6 | Conn_01x06_Pin | Generic connector, single row, 01x06, script generated |
| J9 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| MOSFET1-MOSFET7 | IRFR3708TRPBF | |
| R1,R4,R6,R9 | 470 | Resistor |
| R3,R5 | 12K | Resistor |
| R8 | 200 | Resistor |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| TP1-TP5,TP7,TP8 | TestPoint | test point |