Loading design…
RRST-NHK-Project
基板・回路関連
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | SS8050-G | |
| U1 | CH340C | USB serial converter, crystal-less, UART, SOIC-16 |
| U3 | ESP32-WROOM-32E | RF Module, ESP32-D0WD-V3 SoC, without PSRAM, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| U4 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| C1,C2 | 100nF | Unpolarized capacitor |
| C3,C8,C9 | 22uF/10V(20%) | Unpolarized capacitor |
| C4,C6,C7 | 0.1uF/50V(10%) | Unpolarized capacitor |
| C5 | 0.1uF/50V(10%)(NC) | Unpolarized capacitor |
| D1,D2,D7,D8 | LED | Light emitting diode |
| D3,D4,D6 | LESD5D5.0CT1G | |
| D5 | BAT760-7 | |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2,J3 | XT60-M | |
| J4,J5 | Conn_01x19_Pin | Generic connector, single row, 01x19, script generated |
| MD1 | MD1 | |
| MD2 | MD2 | |
| MD3 | MD3 |
| MD4 | MD4 |
|---|
| R1,R3 | 5.1K | Resistor |
|---|
| R2,R4 | 1K | Resistor |
|---|
| R5-R7 | 10K(5%) | Resistor |
|---|
| R8 | 2K(5%) | Resistor |
|---|
| R9 | 330 | Resistor |
|---|
| Servo1 | Servo1 |
|---|
| Servo2 | Servo2 |
|---|
| Servo3 | Servo3 |
|---|
| Servo4 | Servo4 |
|---|
| SV1 | SV1 | Generic connector, single row, 01x02, script generated |
|---|
| SV2 | SV2 | Generic connector, single row, 01x02, script generated |
|---|
| SV3 | SV3 | Generic connector, single row, 01x02, script generated |
|---|
| SV4 | SV4 | Generic connector, single row, 01x02, script generated |
|---|
| SW1 | SW1 | Generic connector, single row, 01x02, script generated |
|---|
| SW2 | SW2 | Generic connector, single row, 01x02, script generated |
|---|
| SW3 | SW3 | Generic connector, single row, 01x02, script generated |
|---|
| SW4 | SW4 | Generic connector, single row, 01x02, script generated |
|---|
| SW9,SW10 | SW_Push | Push button switch, generic, two pins |
|---|