ArtixDevBoard
RasmusStagsted
KiCad files of a custom made FPGA board powered by Artix 7 (xc7a100t-1fgg484)
Components (48)
| Reference | Value | Description |
|---|---|---|
| Q201 | FDS9926A | 6.5A Id, 20V Vds, Dual N-Channel MOSFET, 30mOhm Ron, SO-8 |
| U101 | TPD2EUSB30 | 2-Channel ESD Protection for Super-Speed USB 3.0 Interface, DRT-3 |
| U102 | FT2232HQ | Hi Speed Double Channel USB UART/FIFO, QFN-64 |
| U103,U105,U106,U108,U109,U111,U112,U114 | NC7SZ125M5X | TinyLogic UHS Buffer, Tri-State Output, SOT-23-5 |
| U104,U107,U110,U113 | TPD12S520DBT | HDMI Receiver Port Protection and Interface Device, TSSOP-38 |
| U201 | ADP5054 | 250kHz to 2MHz, 6A/6A/2A/2A Quad Buck Regulator, -40 to +125C, QFN-48 |
| U301 | XC7A100T-FGG484 | Artix 7 T 100 XC7A100T-FGG484 |
| U501 | W25Q32JVSS | 32Mb Serial Flash Memory, Standard/Dual/Quad SPI, SOIC-8 |
| C101-C103,C107-C110,C301-C314,C316-C319,C322-C330,C337-C345 | 220nF | Unpolarized capacitor |
| C104,C202,C211,C216,C223,C315,C320,C321,C335,C336 | 4.7uF | Unpolarized capacitor |
| C105,C106,C111-C114,C117-C128,C205,C206,C208,C212,C401-C408,C501,C601-C617 | 100nF | Unpolarized capacitor |
| C115,C116 | 22pF | Unpolarized capacitor |
| C201,C210 | 47uF | Unpolarized capacitor |
| C203,C204,C207 | 1uF | Unpolarized capacitor |
| C209,C213 | 2.2uF | Unpolarized capacitor |
| C214,C215,C217,C219,C221,C222,C224,C226 | 10uF | Unpolarized capacitor |
| C218,C220,C227 | 4.7nF | Unpolarized capacitor |
| C225 | 1nF | Unpolarized capacitor |
| C331-C334 | 100uF | Unpolarized capacitor |
| D101,D201,D301,D601,D602 | LED | Light emitting diode |
| D202 | D | Diode |
| J101,J103-J105 | HDMI_A | HDMI type A connector |
| J102 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J201 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J301-J304 | Conn_02x06_Top_Bottom | Generic connector, double row, 02x06, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J401 | Bus_PCI_Express_x4 | PCI Express bus connector x4 |
| J601 | Conn_02x08_Counter_Clockwise | Generic connector, double row, 02x08, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/) |
| L101,L102 | 10uH | Inductor |
| L201,L202 | 1.5uH | Inductor |
| L203,L204 | 3.3uH | Inductor |
| R101,R120,R144,R156,R209,R212,R216,R223 | 10K | Resistor |
| R102,R104 | 27 | Resistor |
| R103,R121,R135-R142,R145,R157,R202,R211,R215,R221,R301,R302,R401-R403 | 0 | Resistor |
| R105,R208,R222 | 12K | Resistor |
| R106-R109,R112,R114,R115,R122-R125,R127,R129,R130,R146-R149,R151,R153,R154,R158-R161,R163,R165,R166,R201,R205,R206 | 47K | Resistor |
| R110,R111,R118,R126,R150,R162,R207,R309 | 1K | Resistor |
| R113,R128,R152,R164,R204 | 33K | Resistor |
| R116,R117,R210,R214 | 5.1K | Resistor |
| R119,R143,R155,R167 | 100K | Resistor |
| R131-R134,R218,R219,R224,R303,R304,R501 | 4.7K | Resistor |
| R203,R220 | 15K | Resistor |
| R213,R603-R605 | 20K | Resistor |
| R217,R307,R601,R602 | 330 | Resistor |
| R305,R306,R308 | 220 | Resistor |
| SW601-SW603 | SW_Omron_B3FS | Omron B3FS 6x6mm single pole normally-open tactile switch |
| TP101-TP107,TP201-TP206,TP401-TP406 | TestPoint | test point |
| X301 | 25MHz | Crystal Oscillator Low Profile / High Stability SPXO |
| Y101 | 12MHz | Four pin crystal, GND on pins 2 and 4 |