ssl-Circuit
Rione
Components (34)
| Reference | Value | Description |
|---|---|---|
| Q1 | NMOS | N-MOSFET transistor, drain/source/gate |
| U1 | MOUDLE-SEEEDUINO-XIAO | |
| U2 | MCP2562-E-P | High-Speed CAN Transceiver, 1Mbps, 5V supply, Vio pin, -40C to +125C, DIP-8 |
| U3 | CH340E | USB serial converter, UART, MSOP-10 |
| U4 | STM32F446RETx | STMicroelectronics Arm Cortex-M4 MCU, 512KB flash, 128KB RAM, 180 MHz, 1.8-3.6V, 50 GPIO, LQFP64 |
| C1,C3 | 4.7u | Unpolarized capacitor |
| C2,C4-C9,C12,C13 | 0.1uF | Unpolarized capacitor |
| C10,C11,C14-C16 | 0.1u | Unpolarized capacitor |
| D1 | LED_main | Light emitting diode |
| D2-D4 | 1N4148W | 75V 0.15A Fast Switching Diode, SOD-123 |
| D5 | LED_Ras1 | Light emitting diode |
| D6 | LED_Ras2 | Light emitting diode |
| D7 | LED_USB | Light emitting diode |
| D8 | LED_volt | Light emitting diode |
| D9 | LED_Debug | Light emitting diode |
| J1 | Raspberry_Pi_2_3 | expansion header for Raspberry Pi 2 & 3 |
| J2 | fan | Generic connector, single row, 01x02, script generated |
| J3 | Debug | Generic connector, single row, 01x07, script generated |
| J4 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J5 | Can_debug | Generic connector, single row, 01x03, script generated |
| LS1 | PKLCS1212E4001-R1 | |
| R1 | 1k | |
| R2,R11,R14 | 470 | Resistor |
| R3,R8,R9,R15 | 300 | Resistor |
| R4,R5 | 2.2k | |
| R6 | 470k | |
| R7 | 100k | |
| R10 | 120 | Resistor |
| R12,R13 | 5.1k | Resistor |
| SW1 | SW_Coded_SH-7070 | Rotary switch, 4-bit encoding, 16 positions, Complementary code |
| SW2 | Ras_1 | Omron B3FS 6x6mm single pole normally-open tactile switch |
| SW3 | Ras_2 | Omron B3FS 6x6mm single pole normally-open tactile switch |
| SW4 | NRST | Omron B3FS 6x6mm single pole normally-open tactile switch |
| SW5 | Boot | Switch slide, single pole double throw |