Control-Module
Rowan-Rocketry
Components (28)
| Reference | Value | Description |
|---|---|---|
| Q1-Q3 | SiS454DN | 35A Id, 20V Vds, N-Channel MOSFET, PowerPAK 1212-8 Single |
| U1 | TC2185-3.3VxCTTR | 3.3V 150mA CMOS LDO with Shutdown and Vref Bypass, SOT-23-5 |
| U2 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U3 | STM32U545RETxQ | STMicroelectronics Arm Cortex-M33 MCU, 512KB flash, 274KB RAM, 47 GPIO, LQFP64 |
| U4 | MS5607-02BA | Barometric pressure sensor, 20cm resolution, 10 to 1200 mbar, I2C and SPI interface up to 20MHz, LGA-8 |
| U5 | LSM6DSL | I2C/SPI, iNEMO inertial module: always-on 3D accelerometer and 3D gyroscope, 1.71V to 3.6V VCC |
| C1,C3,C10 | 1uF | Unpolarized capacitor |
| C2 | 0.01uF | Unpolarized capacitor |
| C4,C5,C18 | 10uF | Unpolarized capacitor |
| C6,C9 | 2.2uF | Unpolarized capacitor |
| C7,C8,C11-C15,C17,C19 | 100nF | Unpolarized capacitor |
| C16 | 10u | Unpolarized capacitor |
| D1,D2 | LED | Light emitting diode |
| D3 | VS5V0UA1LAMTR | Zener diode |
| D4 | B350A-13-F | Diode |
| J1 | Screw_Terminal_01x06 | Generic screw terminal, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | Conn_01x07_Pin | Generic connector, single row, 01x07, script generated |
| J3 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J4 | Micro_SD_Card | Micro SD Card Socket |
| J5 | Screw_Terminal_01x02 | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 2.2uH | Inductor |
| R1-R3,R10,R14,R18 | 1k | Resistor, US symbol |
| R7,R8 | 5.1k | Resistor, US symbol |
| R9,R13,R17 | 3.3k | Resistor, US symbol |
| R11,R15,R19 | 100k | Resistor, US symbol |
| R12,R16,R20 | 22k | Resistor, US symbol |
| RN1,RN2 | 10k | 4 resistor network, parallel topology |
| SW1 | SW_DIP_x04 | 4x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |