ece477_guitartuner
SG295
Automatic Guitar Tuner Project for ECE477 (Senior Design) @ Purdue University
Components (45)
| Reference | Value | Description |
|---|---|---|
| U1 | BQ25185DLHR | |
| U2 | BQ27441-G1 | System Side Li Ion/Polymer Fuel Gauge, PDSON-12 |
| U3,U4 | SMS05T1G | |
| U5 | DRV8834PWP | 11-V, 1.5-A, dual H-bridge or stepper motor driver with 1/32 microstep indexer |
| U6 | MAX7375AXR805 | Silicon Clock Oscillator 8MHz, SC-70-3 |
| U7 | STM32F405RGTx | STMicroelectronics Arm Cortex-M4 MCU, 1024KB flash, 192KB RAM, 168 MHz, 1.8-3.6V, 51 GPIO, LQFP64 |
| U8 | ESD9B5.0ST5G | ESD9B Series 7.8 V 15 pF Surface Mount TVS Diode - SOD-923 |
| C1,C3,C5 | 22uF | Unpolarized capacitor |
| C2,C25 | 1uF | Polarized capacitor, US symbol,Unpolarized capacitor |
| C4 | 0.47uF | Unpolarized capacitor |
| C6,C7,C15,C16,C18-C20,C22,C24 | 100nF | Unpolarized capacitor |
| C8 | 0.01uF | Unpolarized capacitor, small symbol |
| C9,C21,C23 | 2.2uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C10 | 100uF | Polarized capacitor, US symbol |
| C11,C17 | 10uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C12 | 0.1uF | Unpolarized capacitor, small symbol |
| D1,D7 | Orange | Light emitting diode |
| D2,D3,D6 | Green | Light emitting diode |
| D4,D5,D8 | Red | Light emitting diode |
| D9,D10 | Blue | Light emitting diode |
| F1 | C1F 2 | |
| F2 | MFU0805FF01000P500 | |
| J1,J2 | B6B-PH-K-S | |
| J3 | JST_B2B-PH-K-S | |
| J4,J5 | Conn_01x05_Pin | Generic connector, single row, 01x05, script generated |
| J6 | OLED Conn_02x04 | Generic connector, double row, 02x04, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | B4B-XH-A | |
| J8 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| J9 | Conn_02x05_Odd_Even | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J11 | 1051640001 | |
| R1-R4,RN3 | 680 | 4 resistor network, parallel topology, split,Resistor,Resistor, US symbol |
| R5,R21,RN1 | 1k | 8 resistor network, parallel topology, split,Resistor |
| R6,R7,R11 | 5.1k | Resistor |
| R8 | 0.01 1% | Resistor |
| R9,R10,R17,R20,R22,R23,RN2,RV1 | 10k | 8 resistor network, parallel topology, split,DNP,Potentiometer, US symbol,Resistor,Resistor, US symbol |
| R12 | 1.1k | Resistor |
| R13,R24 | 47k | Resistor, US symbol |
| R14 | 1.5k | Resistor, US symbol |
| R15,R16 | 51k | Resistor, US symbol |
| R18,R19 | 0.10 | Resistor, US symbol |
| SW1 | SW_SPST | Single Pole Single Throw (SPST) switch |
| SW2-SW8 | SW_Push | Push button switch, generic, two pins |
| SW9 | SW_SPDT | Switch, single pole double throw |
| TP3-TP6 | TestPoint | test point |