Loading design…
SpacePicklesRocketry
New electrical repo(buggy old one)
| Reference | Value | Description |
|---|---|---|
| Q1-Q4 | BSS138 | 50V Vds, 0.22A Id, N-Channel MOSFET, SOT-23 |
| U1 | ATSAMD11D14A-M | ARM Cortex-M0+ MCU, 48MHz, 16KB Flash, 4KB RAM, 1.6-3.6V, 22 GPIO, QFN-24 |
| U2 | ATmega4809-A | 20MHz, 48kB Flash, 6kB SRAM, 256B EEPROM, TQFP-48 |
| U3 | AT25DF641A-SH-T | |
| U4 | AP2112K-3.3 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| U5 | BD1020HFV | Analog Output Temperature Sensor |
| U6 |
| U7 | TXB0104D | 4-Bit Bidirectional Voltage-Level Translator, Auto Direction Sensing and ±15-kV ESD Protection, 1.2 - 3.6V APort, 1.65 - 5.5V BPort, SOIC-14 |
|---|
| U8 | TPS61092 | 2A Step-Up DC-DC Converter for Batteries, Isw up to 2500mA, 5V Output Voltage, QFN-16 |
|---|
| U9 | MPM3610AGQV-P | MPM3610A Series 21 V 1.2 A Adj. SMT Synchronous Step-Down Converter - QFN-20 |
|---|
| U10 | BMP390L |
|---|
| BZ1 | Buzzer | Buzzer, polarized |
|---|
| C2,C3 | 22p | Unpolarized capacitor |
|---|
| C4,C5 | 22u | Unpolarized capacitor |
|---|
| C6,C11 | 1u | Unpolarized capacitor |
|---|
| C7 | 0u1 | Unpolarized capacitor |
|---|
| C8 | 10u | Unpolarized capacitor |
|---|
| C9 | 2u2 | Unpolarized capacitor |
|---|
| C10 | 100u | Polarized capacitor, US symbol |
|---|
| C12 | 4n7 | Unpolarized capacitor |
|---|
| C13 | 100n | Unpolarized capacitor |
|---|
| D1 | PRTR5V0U2X | Ultra low capacitance double rail-to-rail ESD protection diode, SOT-143 |
|---|
| D2,D3,D7 | LED | Light emitting diode |
|---|
| D4,R8 | DNP | Resistor,Zener diode |
|---|
| D5 | GREEN | Light emitting diode |
|---|
| D6 | PMEG6020ER | 60V, 2A low Vf MEGA Schottky barrier rectifier, SOD-123W |
|---|
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
|---|
| J2 | Conn_02x03_Pin | Generic connector, double row, 02x03, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3 | Micro_SD_Card_Det1 | Micro SD Card Socket with one card detection pin |
|---|
| J4 | STARBOARD_SERVO | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J5 | PORTSIDE_SERVO | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J6 | Battery In | Generic connector, single row, 01x02, script generated |
|---|
| J7 | EJECTION_SERVO | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| JP1,JP2 | Jumper_2_Small_Open | Jumper, 2-pole, small symbol, open |
|---|
| L1 | 6u8 | Inductor |
|---|
| PORTSIDE_RGB1,STARBOARD_RGB1 | SMLVN6RGB | High Brightness Tri-Color LED, RGB, 3.5x2.8mm |
|---|
| R1,R36 | 4.7kΩ | Resistor |
|---|
| R2,R6,R7,R9-R13,R19,R20 | 4k7 | Resistor |
|---|
| R3,R4 | 330 | Resistor |
|---|
| R5 | 0 | Resistor |
|---|
| R14,R15 | 100k | Resistor |
|---|
| R16 | 19k1 | Resistor |
|---|
| R17 | 330R | Resistor |
|---|
| R18,R23,R24 | 10k | Resistor |
|---|
| R21,R22,R34 | 2k2 | Resistor |
|---|
| R25-R30 | 220 | Resistor |
|---|
| R31,R32 | 5k1 | Resistor |
|---|
| R33 | 5m | Resistor |
|---|
| R35 | R220 | Resistor |
|---|
| TP1-TP7 | TestPoint | test point |
|---|
| Y1 | 32.768kHz | Two pin crystal |
|---|