Loading design…
Tinkerbug-Robotics
Model rocket flight computer, ground station, iOS app, and simulation
| Reference | Value | Description |
|---|---|---|
| Q1-Q3 | FS8205A | |
| U1 | GD25Q128ESIG | |
| U2 | TPS61023DRLR | Synchronous boost converter, 0.5-5.5 V in, 2.2-5.5 V out, 3.7 A typ / 2.7 A min valley current limit, 1 MHz, internally compensated, SOT-563 (DRL0006A) | TI TPS61023DRLR | LCSC C919459. Symbol geometry imported verbatim from the Ultra Librarian KiCad v6 export (2026-07-26). Base-station V_LORA boost, replaces LM5157QRTERQ1, rail retargeted 7.49 V -> 4.95 V via a 732k/100k divider (TI datasheet Fig 8-1 values). NOTE: Ultra Librarian types SW and VOUT as power_in; VOUT is really an output, so ERC will want a PWR_FLAG on V_LORA unless that pin type is changed to power_out. |
| U3 | ESP32-S3RH2 | |
| U5 | BQ21040DBVR | 1-cell, 0.8-A Li-ion and Li-polymer battery charger |
| U9 |
| High Efficiency Single Inductor Buck-Boost Converter with 4A Switch 14-VSON -40 to 85 |
| U12 | MP2672AGD-0000-Z |
|---|
| U14 | DW01A |
|---|
| U15 | 479480001 |
|---|
| U22 | TPS22918DBVR |
|---|
| BT2 | BH-18650-A5BJ001-2D | Battery Holder; THM; For Cell 18650 | MYOUNG BH-18650-A5BJ001-2D | LCSC C19184083. Replaces Keystone 1043P; unlike it this holder is NOT polarized, so nothing mechanically prevents a reversed cell. Positive is the pin-1 / silk-plus end. |
|---|
| C1,C9,C12,C14,C16,C17,C23,C29,C30,C33,C52,C55,C56 | 100 nF |
|---|
| C2,C4 | 22 pF |
|---|
| C3,C6 | 12 pF |
|---|
| C8,C13,C18,C27,C28,C51 | 1 uF |
|---|
| C10,C15,C19 | 10 uF |
|---|
| C11,C21 | 10 nF |
|---|
| C34,C40-C42,C48,C53,C54,C58-C62 | 22 uF |
|---|
| C88 | 2.2 nF | Unpolarized capacitor |
|---|
| CR1 | SP0503BAHTG |
|---|
| D6 | Green | Light emitting diode |
|---|
| D7 | Yellow | Light emitting diode |
|---|
| D8,D9 | Blue | Light emitting diode |
|---|
| J2 | USB4110GFA |
|---|
| J4 | S3B-XH-A | Generic connector, single row, 01x03, script generated |
|---|
| J6 | Conn_01x04 |
|---|
| L2 | 24 nH | Inductor, small symbol |
|---|
| L3 | 2 nH | Inductor, small symbol |
|---|
| L4 | 4.3 nH | Inductor, small symbol |
|---|
| L6 | SRP4020TA-1R5M |
|---|
| L8,L9 | VLS3012CX-2R2M-1 | Inductor Power Shielded Wirewound 2.2uH 20% 1MHz Ferrite 2.55A 0.074Ohm DCR 1212 T/R |
|---|
| R1,R2,R43 | 10 k |
|---|
| R3,R4 | 22 |
|---|
| R5,R6,R14,R15 | 5.11 k |
|---|
| R7,R12,R17,R48-R51 | 100 k |
|---|
| R11 | 732 k |
|---|
| R18,R39 | 1 k |
|---|
| R36 | 5.49 k |
|---|
| R37,R57 | 2 k |
|---|
| R38,R41,R54 | 150 | Resistor, US symbol |
|---|
| R40,R44,R46 | 1 M |
|---|
| R42 | 180 k |
|---|
| R45,R47 | 60.4 |
|---|
| R52 | 680 |
|---|
| R53 | 210 k |
|---|
| R55 | 100 |
|---|
| S1 | PB400EEQR1BLK |
|---|
| S3 | R-667995 | Tactile switch, SPST-NO, top actuated, SMD, 0.02 A 15 VDC, 3.0 x 2.0 mm, 163 gf, 500k cycles, IPX8 |
|---|
| TH1 | Thermistor - 4316-103AT-2-ND | Temperature dependent resistor |
|---|
| Y1 | ABS07-32.768KHZ-T |
|---|
| Y2 | ECS-400-10-37B2-CKY-TR |
|---|