hardware
Tuskar-Marine
All tools for the Mermaid's Rest open sailing tools
Components (52)
| Reference | Value | Description |
|---|---|---|
| ICT1 | ISO1044BD | Isolated CAN FD Transceiver, SOIC-8 |
| Q1,Q3,Q5 | BSS314PE | P-Channel 30 V 1.5A (Ta) 500mW (Ta) Surface Mount PG-SOT23 |
| Q2,Q4,Q6 | DMN6075S | N-Channel 60 V 2A (Ta) 800mW (Ta) Surface Mount SOT-23-3 |
| C1,C2,C4,C5,C8,C15-C22,C29-C32 | 0.1uF | 0.1 µF ±10% 100V Ceramic Capacitor X7R 0805 (2012 Metric) |
| C3 | 4.7uF | 4.7 µF ±10% 50V Ceramic Capacitor X7R 1206 (3216 Metric) |
| C6,C7 | 16pF | 16 pF ±5% 50V Ceramic Capacitor C0G, NP0 0603 (1608 Metric) |
| C9,C14 | 22uF | 22 µF ±10% 10V Ceramic Capacitor X7R 1206 (3216 Metric) |
| C10,C13 | 10uF | 10 µF ±10% 25V Ceramic Capacitor X7R 1206 (3216 Metric),10 µF ±10% 50V Ceramic Capacitor X7R 1210 (3225 Metric) |
| C11 | 1nF | 1000 pF ±5% 250VAC Ceramic Capacitor C0G, NP0 (1B) 2211 (5728 Metric) |
| C23 | 0.01uF | 0.01 uF ±5% 100V Ceramic Capacitor C0G, NP0 0805 (2012 Metric) |
| C24 | 100pF | 100 pF ±5% 50V Ceramic Capacitor C0G, NP0 0805 (2012 Metric) |
| C25-C27 | 100uF | 100 µF 50 V Aluminum - Polymer Capacitors Radial, Can 31mOhm 4000 Hrs @ 125°C |
| C28 | 1uF | 1 µF ±5% 100V Ceramic Capacitor X7R 1206 (3216 Metric) |
| CMC1 | ACT12101012PTL00 | 100 µH @ 100 kHz 2 Line Common Mode Choke Surface Mount 5.1 kOhms @ 10 MHz 150mA DCR 1.5Ohm |
| CPD1 | IS31FL3731-SA | 9x16 LED matrix driver with 8-bit PWM and breathing, SSOP-28 |
| DE1 | L77SDE09SA4CH4F | DE9 Female, right angle |
| DE2 | L777SDE09PA4CH4F | 9 Position D-Sub Plug, Male Pins Connector |
| IDCB1 | SPBW06F-05 | Isolated Module DC DC Converter 1 Output 5V 1.2A 9V - 36V Input , 8-SIP , -40C ~ 85C |
| J3 | Program Header | Generic connector, single row, 01x05, script generated |
| J4 | Optional Bond | Generic connector, single row, 01x02, script generated |
| L2 | PA4340.103NLT | 10 µH Shielded Molded Inductor 2.75 A 128mOhm Max Nonstandard |
| LCD1 | NHD-0216K3Z-NS(RGB)-FBW-V3 | 2x16 Character RGB Serial LCD (I2C, RS232, SPI) |
| LED1-LED90 | LED | Red 630nm LED Indication - Discrete 1.95V Radial 2.5 x 5mm rectangular |
| LS1 | TI PCA9306IDCURQ1 | Voltage Level Translator Bidirectional 1 Circuit 2 Channel 8-VSSOP |
| LVR1 | BD450S5FP-CE2 | Linear Voltage Regulator IC Positive Fixed 1 Output 500mA TO-252-3 |
| LVR2 | BD33C0AFP-CE2 | Linear Voltage Regulator IC Positive Fixed 1 Output 3.3V 1A TO-252-3 |
| MCU1 | STM32C092KCT6 | ARM® Cortex®-M0+ STM32C0 Microcontroller IC 32-Bit 48MHz 256KB (256K x 8) FLASH 32-LQFP (7x7) |
| OX1 | 12.60378 | 24 MHz ±30ppm Crystal 12pF 50 Ohms 4-SMD, No Lead |
| PTC2 | 0ZCG0110CF2B | Polymeric PTC Resettable Fuse 33V 1.1 A Ih Surface Mount 1812 (4532 Metric), Concave |
| R1,R2,R4,R6,R8,R10,R14,R18 | 10k | 10 kOhms ±1% 0.25W, 1/4W Chip Resistor 0805 (2012 Metric) Anti-Sulfur, Automotive AEC-Q200 Thick Film |
| R3,R5,R7 | 475 | 475 Ohms ±1% 0.25W, 1/4W Chip Resistor 0805 (2012 Metric) Anti-Sulfur Thin Film |
| R9 | 147 | 150 Ohms ±1% 0.25W, 1/4W Chip Resistor 0805 (2012 Metric) Anti-Sulfur Thin Film |
| R11,R15,R19 | 1k | 1 kOhms ±1% 0.25W, 1/4W Chip Resistor 0805 (2012 Metric) Anti-Sulfur Thin Film |
| R12,R16,R20 | 100k | 1 kOhms ±1% 0.25W, 1/4W Chip Resistor 0805 (2012 Metric) Anti-Sulfur Thin Film |
| R13,R17 | 68.1 | 68.1 Ohms ±1% 0.25W, 1/4W Chip Resistor 0805 (2012 Metric) Anti-Sulfur Thin Film |
| R21 | 200K | 475 Ohms ±1% 0.25W, 1/4W Chip Resistor 0805 (2012 Metric) Anti-Sulfur Thin Film |
| R22-R24 | 4.7k | 4.7 kOhms ±1% 0.25W, 1/4W Chip Resistor 0805 (2012 Metric) Anti-Sulfur, Automotive AEC-Q200 Thick Film |
| R25 | 20k | 20 kOhms ±1% 0.25W, 1/4W Chip Resistor 0805 (2012 Metric) Anti-Sulfur, Automotive AEC-Q200 Thick Film |
| R26-R29 | 3.3k | 3.3 kOhms ±0.5% 0.25W, 1/4W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thin Film |
| ROM1,ROM2 | M24C64 | EEPROM Memory IC 64Kbit I2C 1 MHz 450 ns 8-SOIC |
| RST1 | MAX3232 | Automotive 3V TO 5.5V Multichannel RS-232 Line Driver and Receiver WITH ±15kV IEC ESD Protection |
| SD1 | VS-30MQ040HM3/5AT | Diode 40 V 3A Surface Mount DO-214AC (SMA) |
| SW1 | Boot | Tactile Switch SPST-NO Top Actuated Through Hole |
| SW2 | Reset | Tactile Switch SPST-NO Top Actuated Through Hole |
| TB1 | 1862440 | 5 Pos Wire to Board TB 45° 5.00mm Through Hole |
| TP1 | Ship Power | Generic connector, single row, 01x05, script generated |
| TP2 | Board Power | Generic connector, single row, 01x03, script generated |
| TP3 | IS31 I2C | Generic connector, single row, 01x02, script generated |
| TP4 | Board I2C | Generic connector, single row, 01x02, script generated |
| TVS1 | SMBJ20A-Q | 32.4V Clamp 18.6A Ipp Tvs Diode Surface Mount DO-214AA (SMB) |
| TVS2 | PESD2CANFD54VT-QR | 41V Clamp 5A (8/20s) Ip EsD Diode Surface Mount TO-236AB ,24V (Max) 41V .-55C ~ 150C (TA) |
| TVS3,TVS4 | TPD2E2U06QDBZRQ1 | 12.4V (Typ) Clamp 5.5A (8/20µs) Ipp Tvs Diode Surface Mount SOT-23-3 |