FMC_MIPI
VideoGPU
FMC card to allow interfacing Xilinx FPGA boards with Jetson TX2 or TX1 via CSI-2 camera interface
Components (26)
| Reference | Value | Description |
|---|---|---|
| IC1 | SN74AVC4T245PWR | 4-Bit Dual-Supply Bus Transceiver with Configurable Voltage-Level Shifting and 3-State Outputs |
| IC2 | AT24MAC402-MAHM-T | MICROCHIP - AT24MAC402-MAHM-T - EEPROM, 2KBIT, -40 TO 85DEG C |
| IC3-IC5 | TCA9406DCUR | 2-Bit Bidirectional 1-MHz I2C Bus and SMBus Voltage-Level Shifter |
| IC6,IC7 | SN74AVC1T45DCKT | Single-Bit Dual-Supply Bus Transceiver with Configurable Voltage-Level Shifting and 3-State Outputs |
| U1 | LP5907MFX-1.8 | |
| U2 | SN74AVC2T45DCUR | |
| U3,U8 | SN74AVCH16T245GR | Texas Instruments SN74AVCH16T245GR, Quad, Bus Transceiver, 16-Bit Non-Inverting 3-State, 1.2 3.6 V, 48-Pin |
| U4 | TLV75525PDBV | |
| U5,U6 | TS3DDR3812_RUA_42 | |
| U7 | LP5907MFX-1.2 | |
| C1-C3,C5,C6,C9-C24,C32-C41 | 0.1uF | |
| C4,C29-C31 | 4.7uF | |
| C7,C8,C25-C28 | 1uF | |
| D1-D4 | UCLAMP0501H.TCT | SEMTECH - UCLAMP0501H.TCT - TVS DIODE, 240W, 5V, SOD-523, FULL REEL |
| J1 | ASP-134488-01 | |
| J2 | QTH-060-01-L-D-A | |
| J3 | Conn_01x08_Female | |
| JP1 | Jumper_3_Bridged12 | |
| JP2,JP3 | Jumper | |
| R1,R6-R8,R12-R28,R36-R38,R75 | 0 | |
| R2-R5,R9-R11,R30,R33,R35 | 4.7k | |
| R29,R31,R32,R34 | 2.2k | |
| R39,R40,R45,R46,R51,R52,R57,R58,R63,R64,R69,R70 | 220 | |
| R41,R42,R47,R48,R53,R54,R59,R60,R65,R66,R71,R72 | 47 | |
| R43,R44,R49,R50,R55,R56,R61,R62,R67,R68,R73,R74 | 9.1 | |
| TP1,TP2 | GND |